Rank: Member
Groups: Registered
Joined: 11/10/2010(UTC) Posts: 5
|
Our Maytag Performa is out of balance 85% of the time when in the final spin cycle. During this time we have to readjust the clothes in order to get it to spin smoothly. What parts should I inspect to determine what is causeing this problem?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/16/2007(UTC) Posts: 3,273
|
Remove the front panel and observe the operation during a spin cycle. Put some weight in it, like a load of towels, or jeans. Check to see if there are any disconnected or broken balance springs. Jiggle the top of the tub and listen for a sploshing of the liquid in the balance ring.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/10/2010(UTC) Posts: 5
|
The springs are attached and do not appear broken. Where would I find the balance ring? In the diagrams on this site I am not finding one for my particular model. Originally Posted by: magician59 Remove the front panel and observe the operation during a spin cycle. Put some weight in it, like a load of towels, or jeans. Check to see if there are any disconnected or broken balance springs. Jiggle the top of the tub and listen for a sploshing of the liquid in the balance ring.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/10/2010(UTC) Posts: 5
|
Also, when observing the spin cycle the tub can move enough and hit the back of the cabinet. Originally Posted by: jbriggs71 Our Maytag Performa is out of balance 85% of the time when in the final spin cycle. During this time we have to readjust the clothes in order to get it to spin smoothly. What parts should I inspect to determine what is causeing this problem?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/16/2007(UTC) Posts: 3,273
|
The tub bbalance ring was a mis-speak (got my brands confused). Does the machine vibrate only in spin, or does it vibrate also in agitate?
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/10/2010(UTC) Posts: 5
|
Just in spin and primarily the last spin cycle. Originally Posted by: magician59 The tub bbalance ring was a mis-speak (got my brands confused). Does the machine vibrate only in spin, or does it vibrate also in agitate?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/16/2007(UTC) Posts: 3,273
|
It may be a worn spin bearing or a tub seal causing the condition. I have a manual available, if you're comfortable with getting me your email address.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/10/2010(UTC) Posts: 5
|
That would be great. Just send it to jbriggs71@comcast.netOriginally Posted by: magician59 It may be a worn spin bearing or a tub seal causing the condition. I have a manual available, if you're comfortable with getting me your email address.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/16/2007(UTC) Posts: 3,273
|
I tried to email the file earlier, but it didn't send before it was time to log off at work. I'll send it tomorrow morning.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close