Washer Repair

lee79 · #1 (**permalink**) 10-20-2010, 07:20 AM

I am working on my washing machine and found that the agitator is not working properly. I have found that the agitator dogs are worn to bare surface and want to replace them...how do i remove the agitator system from the washer mover and replace them with a new agitator kit?

sidfink43 · #2 (**permalink**) 10-21-2010, 05:47 PM

I cannot get your model number to come up, but generally on these you will take out the fabric softener unit, take off a cover and you will see a
7/16" bolt which you will remove with a socket and an extension.

The agitator will now come up and off, and apart to get to the dogs.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replacing parts	JuFlem	Dryer Repair	4	09-15-2010 07:14 PM
Defrost problem. Tried replacing main parts	sammyinthelbc	Refrigerator & Freezer Repair	7	09-02-2010 10:48 PM
replacing top agitator	aaulidge	Washer Repair	1	04-06-2010 07:22 PM
Replacing parts	washerdummy	Washer Repair	1	08-19-2009 05:27 AM
Replacing Agitator/Spline in GE washer	cdubosq	Washer Repair	1	12-03-2008 09:04 PM

Replacing parts on the agitator

Washer Repair

I am working on my washing machine and found that the agitator is not working properly. I have found that