Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
still won't work
Options
Go to last post Go to first unread
Model: WTW6200SW2 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
lakelbr  
#1 Posted : Wednesday, October 20, 2010 2:27:33 AM(UTC)
Quote
lakelbr

Rank: Member

Groups: Registered
Joined: 10/14/2010(UTC)
Posts: 2
Whirlpool washer began by noit filling up with water. Replaced the water inlet valve with no luck. Was advised to replace the motor control unit, which has been done. Washer worked for about 1/2 of a wash cycle and is not full of water and won't do anything. Have about $300 in new parts on a broken washer. Please advise as to what next.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Cycle Buzzer still won't work. (Dryer Repair)
by KenmoreforLife 3/22/2014 11:12:30 AM(UTC)
Replaced Element and Oven Still Won't Work (Oven Repair (including Ranges and Cooktops))
by LaughingBat 4/4/2012 4:19:47 PM(UTC)
soap dispenser still won't work (Dishwasher Repair)
by willys 3/11/2012 12:24:30 PM(UTC)
new timer, many tests, still won't work (Dryer Repair)
by zenart 1/22/2012 7:05:24 AM(UTC)
Replaced Electronic Board, Controls Still Won't Work (Oven Repair (including Ranges and Cooktops))
by Ed Krosel 10/21/2011 5:36:40 AM(UTC)
machine stopped and control lock light came on .now that its off it still won't work (Washer Repair)
by lauribob 6/7/2011 5:31:57 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET