Discuss

Reinstalling door hindge on Danby washer

 in

Washer Repair

. "

I did not realize when I removed the hinge that the self-tapping screws are apparently installed through a plate inside

..."
 
 
Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Appliance Repair Help > Washer Repair » Reinstalling door hindge on Danby washer

Post New Thread  Reply By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use.
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 09-30-2010, 07:53 PM
Junior Member
 
Join Date: Sep 2010
Posts: 2
Michael Thomas is on a distinguished road
Default Reinstalling door hindge on Danby washer
Brand: -other-   Age: Less than 1 year   

Appliance Parts from AppliancePartPros.com


I did not realize when I removed the hinge that the self-tapping screws are apparently installed through a plate inside the cabinet which is not secured in place, and which I assume has fallen into the cabinet (the screws are not catching on anything).



So, I need to know the simplest way to access the back of the cabinet front to recover the plate and hold it in place to reinstall the hinge. Is there some way to remove the rubber gasket from the front, or do I have to remove the entire front panel... or what?

Thanks.

Reply With Quote
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
  #2 (permalink)  
Old 10-02-2010, 05:52 PM
Senior Expert
APP Volunteer
 
Join Date: Mar 2009
Posts: 10,902
sidfink43 has a spectacular aura about
Default

I don't think any of us know this brand, I suggest you contact the manufacturer.
__________________
-
Reply With Quote
  #3 (permalink)  
Old 10-02-2010, 06:22 PM
Junior Member
 
Join Date: Sep 2010
Posts: 2
Michael Thomas is on a distinguished road
Default

Looks like that's the best shot...
Reply With Quote
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bosch dishwasher hindge pulley replacement mikecantin Dishwasher Repair 2 08-06-2010 11:17 PM
GE reinstalling boot to drum after repairing maureengld Washer Repair 1 02-12-2010 08:13 AM
my maytag wont ignite after reinstalling bigrubee Oven Repair (including Ranges and Cooktops) 5 08-22-2009 09:23 AM
trouble reinstalling upper dishwasher rack smakrs Dishwasher Repair 1 02-04-2009 06:20 PM
Door Hindge spring replacement Rick Hey Oven Repair (including Ranges and Cooktops) 0 12-05-2008 07:13 PM



All times are GMT -7. The time now is 06:47 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17