Washer Repair

pattymm · #1 (**permalink**) 10-09-2008, 11:33 PM

Based on other posts (error code 01-platini), I think the dual cold water valve on my bosch front loading washing machine isn't working. I'd like to replace it myself but don't know how to get in there. Do I remove the top panel or the back? Are there screws or do I just pop those clips at the top? Will I need special tools to disconnect the valve or do the hoses just unscrew? Are there any wires attached that tell the valves when to open? Do these questions make it clear that I should not be trying this myself? Thanks for your help.

kayakcrzy · #2 (**permalink**) 10-10-2008, 03:38 PM

I don't have info on the bosch but I did replace one before. I just took the top off the washer, and then you can get to it. Tom www.applianceeducator.com

pattymm · #3 (**permalink**) 10-14-2008, 12:25 PM

Thanks for your reply, Tom.
Do you remember if the valve easily popped into place?
patty

kayakcrzy · #4 (**permalink**) 10-14-2008, 02:03 PM

I remember it was pretty easy. I was surprised. Tom ApplianceEducator.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dual Valve Water Leak	EarthWAyJK	Refrigerator & Freezer Repair	1	09-27-2008 02:26 PM
Replace Water Inlet Valve	Richard Lindner	Refrigerator & Freezer Repair	1	09-03-2008 01:37 PM
remove/replace 67005154 dual water valve on maytag mfd2560hes fridge	maytagdualwatervalve	Refrigerator & Freezer Repair	1	07-29-2008 12:14 PM
repair or replace water inlet valve	richard1520	Washer Repair	1	12-17-2007 10:51 PM
Water inlet valve	gentleben	Refrigerator & Freezer Repair	1	07-19-2007 12:04 PM

how to replace dual water inlet valve

Washer Repair

Based on other posts (error code 01-platini), I think the dual cold water valve on my bosch front loading