|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Will not Drain - Cleaned out drain boot |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: WSSH300GWW Brand: GE Age: 1 - 5 years
Have had this machine since 6/07 with no problems - worked very well up until now! I got the error code E23 when I pressed the start/pause buttons and it says "Drain Pump Relay on Control Board Failed.... Replace Control Board" So I cleaned out the boot just in case I could get away with an easy fix (not that it was all that easy!) but it will not drain. When it gets to rinse cycle it buzzes loudly and my husband said that it that the buzzing seems to be coming from the drain pump - that it is vibrating when it buzzes. I am concerned that I will have control board replaced and it will actually be the drain pump!? Are the codes reliable? Is it vibrating the pump because the buzzer mechanism is near it? How hard is it to replace the control board? Any help is appreciated!!
Ads By Google Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| My Hotpoint washer won't drain or spin, but it will if I drain the hose by gravity? | ks_becker | Washer Repair | 0 | 08-10-2010 10:25 AM |
| bosch shu9925 - drain pump works, won't drain after cycle | mjbarr | Dishwasher Repair | 0 | 10-16-2009 01:11 PM |
| Tension Wire Around Boot Drain Kit | mlau | Washer Repair | 14 | 08-05-2009 07:52 AM |
| Timer will only advance to fill and wash not drain (have to manually move to drain) | zibdi1 | Dishwasher Repair | 0 | 06-15-2009 03:47 PM |
| replacing drain boot/elbow #WD18X213 | rsy | Dishwasher Repair | 1 | 09-18-2007 07:54 PM |