[Montana_Pete]

I need some serious help with this new GE washer. GE washer will no longer spin or agitate. Will fill and drain ok. But no motor action.

#1 I checked inline motor fuse it looked ok. But direct wired it anyway
#2 Motor LED flashes constantly 1sec on 1sec off

What sensor might no be letting the motor start?

What should I check next?

Washing backing up here in Montana

[libertyappl]

I can't pull up the model number you have posted, but start by checking the lid switch and the belt. and double check the model number please.
Nat

[Montana_Pete]

http://products.geappliances.com/App...W&SITEID =GEA

Yes belt is perfect and lid switch is magnetic and makes a little clicking sound when I open and close it.. Machine is just over a year old....

Motor LED binks on / off every one second constant.

Water fills and drains but it just won't activate the motor.

Should I cut lid wires and connect to be sure?

[libertyappl]

Check the connections at the motor, and if you can test the motor. We had one of these about a month ago and it was the motor. I don't remember all the details of it will have to look it up.
Nat

[Montana_Pete]

I don't know how to test the motor.

LED is blinking 1 sec on 1 sec off contant.

Do you have a hot wire pin out for this thing?

[richappy]

You have a fuse in the wiring harness, just check per the schematic. Either that or a blown thermal protector internal to the motor.

[Montana_Pete]

LEDS on motor blinking 1 second constant on off. What does this indicate as to motor health?

[libertyappl]

I'm going to say it's the motor that's out.
Nat

[ftmaster281]

i have tested the fuse link and it is fine and also tested the door magnet and that is working ok.

[ftmaster281]

how can i tell if my motor will not work even if the led light is on .