[ldmoff123]

Last night I was washing one small item on the lowest water amt. on my old maytag. When on the spin cycle, it started pouring water. I thought that perhaps since it was unbalanced and wobbly, just having one item would cause it to rock more and spill water. Tonight I put 4 towels through a cycle, and during the spin cycle it leaked again immediately. From this i've concluded that its not just an unbalance. I have moved recently and can't put my hands on a manual. Help!

[libertyappl]

Please post you model number.
nat

[ldmoff123]

Where I be able to find the model number? Since I can't find the manual (figures!), would it be somewhere on the machine?

[libertyappl]

Look on the back of the control panel.
nat

[ldmoff123]

Its an A613 Maytag. Probably at least 10-15 years old.

[misterfixall]

remove front panel +observe, there 2 screws at bottom .philips screwdriver, pull cover forward +off

[ldmoff123]

What am I looking for when I take off the front panel?

[libertyappl]

Not sure what he's thinking....
What you want to do is raise the top and remove the front panel.
Fill the tub with a small load amount of water, the turn it to the spin cycle, see if you can see where the water is coming from without the front panel on the machine.
let us know where you see the leak.
Nat

[Drags1998]

No Nat, he's right remove the FRONT panel, Look where the Transmission goes up into the tub, if it looks rusty, put a small load of water into it and you should find your LEAK!!!

[libertyappl]

As I said remove the front panel........ But to do that you have to raise the top first drags.