Washer Repair

arcbiscuit · #1 (**permalink**) 08-20-2010, 07:26 AM

My washer will not fill with water, I have replaced water inlet valve , the water IS turned on. Without water in the bowl it spins and ejects the water just fine. When I fill the bowl with water say …1/3 of the way up and select “low” it agitates and works just fine , when I adjust the selector to medium or high it will not fill or agitate. I have cleaned out the tube leading to the water level switch and when I blow into the water level switch it starts agitating with or without water in the bowl , but it still will not fill with water.
The timer seems to be working…it “ticks” and advances as it always has.

sidfink43 · #2 (**permalink**) 08-22-2010, 12:00 PM

Everything you report says that the water level switch is bad. Replace and see if that does not fix your problem.

arcbiscuit · #3 (**permalink**) 08-23-2010, 06:54 AM

actally found the problem Sunday, was that stupid fuse located just under the the water level switch behind the front panel ... thanks for the help

sidfink43 · #4 (**permalink**) 08-23-2010, 07:30 AM

Great, glad you found the problem and thanks for the update

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Maytag Dishwasher not always using water.	COBBCITY	Dishwasher Repair	1	08-19-2009 12:04 PM
Maytag/ no cold water	sglucky	Washer Repair	7	05-28-2009 04:55 PM
Maytag A210, No hot water	Ike8477	Washer Repair	1	03-12-2009 07:29 AM
Maytag has new water valve, but no water	ultimatefighter34	Dishwasher Repair	3	11-02-2007 12:02 PM
Maytag Washer No Water	TimW	Washer Repair	0	10-29-2007 06:24 AM

no water in maytag

Washer Repair

My washer will not fill with water, I have replaced water inlet valve , the water IS turned on. Without