|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Kenmore compactor have to hold twist knob to fully cycle |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
04-29-2009, 08:28 AM
|
|||
|
|||
Kenmore compactor have to hold twist knob to fully cycle
Model Number: 665.1350194 Brand: Kenmore Age: 5 - 10 years
I have this Kenmore compactor and when the switch is in the normal mode, I have to hold (for the full cycle) the rotarty switch in the clockwise rotated position to get it to complete a full down/up cycle. Seems to me that I should be able to twist the rotart control fully clockwise, make momentary contact and then let go, and then it should run a full down/up cycle. If the switch is in the super compact position, I can twist the control and let go and it will run to the fully down position without holding the switch. Am I correct about the statement that I should not have to hold the switch to run a normal cycle? If so, what part has failed? Thanks for any help, Frank
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
04-29-2009, 12:26 PM
|
||||
|
||||
|
The first thing I would suspect is the cycle switch.
- The part number for the cycle switch is AP2948815 Gene.
__________________
Appliance Repair Expert in Orange County, California. Order Appliance Parts with 365-Day Hassle Free Return Policy - AppliancePartsPros.com
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Stuck in rinse and hold cycle. | Strock | Dishwasher Repair | 1 | 08-17-2012 03:32 PM |
| Won't complete final cycle or fully drain | bill110 | Dishwasher Repair | 0 | 08-13-2009 12:14 PM |
| Kenmore washer does not fully agitate | michael b | Washer Repair | 1 | 07-14-2009 04:41 PM |
| defective cycle control knob won't push in; need to grasp & turn wash cycle dial. | lewisj | Washer Repair | 1 | 11-10-2008 10:03 AM |
| Whirlpool Quiet Partner II-Water does not fully drain at the end of the cycle. | helpme00 | Dishwasher Repair | 1 | 09-20-2008 01:48 PM |
Linear Mode
