Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 500
Search took 0.11 seconds.
Search: Posts Made By: fairbank56
Forum: Washer Repair Today, 08:23 AM
Replies: 1
Views: 67
Posted By fairbank56
Yes, sounds like a bad timer. Whirlpool 3955765...

Yes, sounds like a bad timer.

Whirlpool 3955765 Timer, Control (60 Hz.) (motor Not A Service Part) - AppliancePartsPros.com...
Forum: Washer Repair Yesterday, 11:57 AM
Replies: 5
Views: 92
Posted By fairbank56
No problem ,two heads are better than one :)

No problem ,two heads are better than one :)
Forum: Washer Repair Yesterday, 11:41 AM
Replies: 5
Views: 92
Posted By fairbank56
Be more specific, I have no idea what you mean by...

Be more specific, I have no idea what you mean by "will not complete rinse cycle". We are volunteer techs who check in periodically during the day so you will not get an immediate response.

Eric
Forum: Dryer Repair Yesterday, 08:21 AM
Replies: 4
Views: 128
Posted By fairbank56
Yes, you are correct, I was thinking Whirlpool,...

Yes, you are correct, I was thinking Whirlpool, sorry to mislead you! I believe yours does have a left handed thread. The way to tell for sure is to run the motor. While looking at the end that the...
Forum: Dryer Repair Yesterday, 05:16 AM
Replies: 4
Views: 128
Posted By fairbank56
It's standard right hand thread and the...

It's standard right hand thread and the restrainer will keep the belt from popping off during starting/stopping.

Eric
Forum: Washer Repair 05-27-2015, 06:50 AM
Replies: 2
Views: 108
Posted By fairbank56
Model number doesn't come up, assume this is an...

Model number doesn't come up, assume this is an LAT9605 ? Swap the electrical connectors between the hot and cold valve solenoids and see if you get cold water when hot is selected. If not, screens...
Forum: Washer Repair 05-26-2015, 05:08 PM
Replies: 8
Views: 156
Posted By fairbank56
Nothing else has to be removed. The drive block...

Nothing else has to be removed. The drive block is stuck to both the tub and the basket drive (transmission shaft). Try pouring boiling hot water from a tea kettle all around the top of the drive...
Forum: Washer Repair 05-26-2015, 02:18 PM
Replies: 8
Views: 156
Posted By fairbank56
It's just that the drive block has corroded and...

It's just that the drive block has corroded and basically welded everything together. Get a helper and try rocking the tub back and forth really hard. This is a common problem but usually only...
Forum: Washer Repair 05-26-2015, 11:10 AM
Replies: 8
Views: 156
Posted By fairbank56
OK, so it looks like in your second photo that...

OK, so it looks like in your second photo that you have already removed the outer tub top ring, is that correct? If so, then that's it, you don't need to remove anything from the inner tub.

Eric
Forum: Washer Repair 05-26-2015, 07:47 AM
Replies: 8
Views: 156
Posted By fairbank56
Well, for one you need to remove the outer tub...

Well, for one you need to remove the outer tub top ring. The inner tub can be a bear to break loose as the drive block can become corroded to the tub and to the transmission shaft. Banging on the top...
Forum: Dryer Repair 05-24-2015, 04:25 AM
Replies: 6
Views: 276
Posted By fairbank56
Good job and thanks for the update. Eric

Good job and thanks for the update.

Eric
Forum: Washer Repair 05-23-2015, 01:21 PM
Replies: 4
Views: 159
Posted By fairbank56
From the timer connector, cut the tan wire,...

From the timer connector, cut the tan wire, orange/black wire and gray wire. Strip both ends of the orange/black wire and both ends of the gray wire but only the end of the tan wire from the...
Forum: Washer Repair 05-23-2015, 07:10 AM
Replies: 4
Views: 159
Posted By fairbank56
On the timer connector, there is a violet jumper...

On the timer connector, there is a violet jumper wire that goes from R1 to R20. R1 is on the outside corner of the connector, R20 is in the middle, second from opposite end of R1. Cut this jumper and...
Forum: Washer Repair 05-23-2015, 05:16 AM
Replies: 2
Views: 203
Posted By fairbank56
I thought this was taken care...

I thought this was taken care of???

http://forum.appliancepartspros.com/washer-repair/560424-kenmore-washer-80-series-spin-problem.html

Eric
Forum: Dryer Repair 05-22-2015, 08:44 PM
Replies: 4
Views: 220
Posted By fairbank56
Check for a grounded heat element. Whirlpool...

Check for a grounded heat element.

Whirlpool 279838 Whirlpool Dryer Heating Element - AppliancePartsPros.com...
Forum: Dryer Repair 05-22-2015, 05:14 PM
Replies: 4
Views: 220
Posted By fairbank56
Does it produce heat when in air only cycle? If...

Does it produce heat when in air only cycle? If so, sounds like you have a grounded heat element.

Eric
Forum: Washer Repair 05-22-2015, 09:40 AM
Replies: 1
Views: 142
Posted By fairbank56
Sounds like the lid switch. Check for loose...

Sounds like the lid switch. Check for loose screws on the left side lid hinge. That hinge operates the lid switch. You could also jump out the lid switch to rule it out for sure. Otherwise, could be...
Forum: Washer Repair 05-22-2015, 07:42 AM
Replies: 3
Views: 177
Posted By fairbank56
There's a video on the linked page for the...

There's a video on the linked page for the part.

Eric
Forum: Washer Repair 05-21-2015, 01:37 PM
Replies: 3
Views: 177
Posted By fairbank56
Faulty lid switch. These switches are prone to...

Faulty lid switch. These switches are prone to breaking apart and can be glued back together, cinched with a small plastic tie wrap or just replaced.

Whirlpool 3949238 Lid Switch Assembly -...
Forum: Dryer Repair 05-20-2015, 07:19 PM
Replies: 5
Views: 269
Posted By fairbank56
Yes, a new element will take care of that...

Yes, a new element will take care of that problem. Here's the link for that part as well as the thermal fuse if you need it.

Whirlpool 279838 Whirlpool Dryer Heating Element - AppliancePartsPros.com...
Forum: Dryer Repair 05-20-2015, 02:37 PM
Replies: 5
Views: 269
Posted By fairbank56
Sounds like you have a grounded heat element...

Sounds like you have a grounded heat element which is why it's heating without the motor running. As for the motor not running, check the thermal fuse on the blower housing. A grounded element can...
Forum: Dryer Repair 05-20-2015, 07:04 AM
Replies: 1
Views: 174
Posted By fairbank56
You need to open the toe panel for access. Use a...

You need to open the toe panel for access. Use a putty knife into the top groove of the toe panel to push in on the clips to release them. Check continuity of the fuse. Other possibilities include a...
Forum: Dryer Repair 05-18-2015, 12:10 PM
Replies: 1
Views: 156
Posted By fairbank56
Most likely, faulty gas valve coils. Whirlpool...

Most likely, faulty gas valve coils.

Whirlpool 279834 Dryer Gas Valve Coil Kit - AppliancePartsPros.com (http://www.appliancepartspros.com/whirlpool-coil-kit-for-279834-ap3094251.html)

Eric
Forum: Washer Repair 05-18-2015, 12:07 PM
Replies: 3
Views: 253
Posted By fairbank56
Sounds like a faulty motor coupler. See video on...

Sounds like a faulty motor coupler. See video on this link.

Whirlpool 285753A Whirlpool Direct Drive Washer Motor Coupling - AppliancePartsPros.com...
Forum: Washer Repair 05-18-2015, 12:02 PM
Replies: 5
Views: 214
Posted By fairbank56
Yes, when you turn that, the brakes should move...

Yes, when you turn that, the brakes should move inward so that the basket drive can be fully pushed up. Then you can test by rotating it CCW which should cause the basket to rotate and the brakes...
Showing results 1 to 25 of 500

 
Forum Jump


All times are GMT -7. The time now is 09:35 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17