Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 500
Search took 0.10 seconds.
Search: Posts Made By: Joe / APP Team
Forum: Washer Repair 06-12-2015, 06:47 AM
Replies: 27
Views: 67,465
Posted By Joe / APP Team
Tim, Great !!! We're happy you found the problem....

Tim, Great !!! We're happy you found the problem. Keep an eye out for articles falling on the floor when loading and unloading the washer and dryer. Thanks for the update Good Luck,
Forum: Oven Repair (including Ranges and Cooktops) 06-08-2015, 06:29 AM
Replies: 13
Views: 5,728
Posted By Joe / APP Team
OldCH4, Great !!! Glad we could help a little....

OldCH4, Great !!! Glad we could help a little. Good Luck !!!
Forum: Refrigerator & Freezer Repair 06-01-2015, 07:15 AM
Replies: 5
Views: 3,574
Posted By Joe / APP Team
Spencer, There won't be any voltage across the...

Spencer, There won't be any voltage across the capacitor, unless the motor is starting or running, and it would take a special meter to read.
Like all capacitors you can circuit check the component....
Forum: Oven Repair (including Ranges and Cooktops) 04-02-2015, 06:27 AM
Replies: 11
Views: 6,016
Posted By Joe / APP Team
Dave, Thanks for the input, advice and photo's....

Dave, Thanks for the input, advice and photo's. The info will come in handy for others reviewing the Repair Forum. Thanks Again,
Forum: Dishwasher Repair 03-25-2015, 06:26 AM
Replies: 3
Views: 2,021
Posted By Joe / APP Team
Waltercook, If you purchase the correct epoxy for...

Waltercook, If you purchase the correct epoxy for the application, follow the preparation and application directions, it will work. Will it work for 15 - 20 years, probably not, 4 or 5 years...
Forum: Washer Repair 03-25-2015, 06:13 AM
Replies: 27
Views: 67,465
Posted By Joe / APP Team
Handyman, Thanks for the update, we'e glad...

Handyman, Thanks for the update, we'e glad everything worked out for you.
You'll want to remember that lesson when you work with error codes on any machine. The codes are more of a "suggestion" than...
Forum: Refrigerator & Freezer Repair 03-24-2015, 11:36 AM
Replies: 5
Views: 6,871
Posted By Joe / APP Team
Gary, Thanks for the additional information,...

Gary,

Thanks for the additional information,
it'll come in handy for others using the forum Great Job.
Forum: Washer Repair 03-06-2015, 08:15 AM
Replies: 41
Views: 31,349
Posted By Joe / APP Team
Dandur, We couldn't find a "Betty"...

Dandur, We couldn't find a "Betty" either, but then some of he posters use a AKA. But if the system works correctly, she should be notified that there was a posting to the forum in regards to the...
Forum: Washer Repair 03-05-2015, 11:43 AM
Replies: 41
Views: 31,349
Posted By Joe / APP Team
Dandur, If the "Gunk" on the hub...

Dandur, If the "Gunk" on the hub "gears" was "heavy" and or Gummy enough, it could have kept the tub from engaging the drive hub properly and caused the F70 code. Remember, in the wash cycle the spin...
Forum: Washer Repair 03-03-2015, 08:39 AM
Replies: 41
Views: 31,349
Posted By Joe / APP Team
Dandur, OK, will keep an eye out for your next...

Dandur, OK, will keep an eye out for your next post, hope you feel better soon.
Forum: Washer Repair 03-03-2015, 07:04 AM
Replies: 41
Views: 31,349
Posted By Joe / APP Team
Dandur, Sometimes a serial number is necessary...

Dandur, Sometimes a serial number is necessary for proper parts and service reviews and research, it doesn't hurt to be thorough.
As you know the F 70 error code is displayed when the machine is...
Forum: Washer Repair 03-02-2015, 06:12 AM
Replies: 41
Views: 31,349
Posted By Joe / APP Team
Dandur, Make sure you include the model number...

Dandur, Make sure you include the model number (and serial number if possible) on your next post, it helps in the diagnosis.
Forum: Washer Repair 02-17-2015, 07:14 AM
Replies: 23
Views: 18,836
Posted By Joe / APP Team
Dan, Re post your question, include an e mail...

Dan, Re post your question, include an e mail address. That way we can send you the illustrated information that should help you out.
Forum: Washer Repair 02-16-2015, 09:08 AM
Replies: 10
Views: 4,696
Posted By Joe / APP Team
Sqott, Great !!!, Corroded contacts and loose...

Sqott,

Great !!!,

Corroded contacts and loose connections can be a bit frustarting, but once you've got them cleaned and reattached, you're usually alright for quite a while.

Here's Hoping, Good...
Forum: Washer Repair 02-16-2015, 08:28 AM
Replies: 23
Views: 18,836
Posted By Joe / APP Team
Dan, You're pretty much on track and on target....

Dan,

You're pretty much on track and on target.

The
AP5306816

Outer tub assembly will contain all the parts you'll need to replace the tub bearings and seal assembly.

The repair itself is a bit...
Forum: Oven Repair (including Ranges and Cooktops) 02-04-2015, 07:04 AM
Replies: 8
Views: 4,357
Posted By Joe / APP Team
dmulvi, Some people / servicers would just bypass...

dmulvi, Some people / servicers would just bypass the switch. But that could be a little dangerous in the even of a spill over or short in the wiring.
We wish we knew what you have in mind, the...
Forum: Washer Repair 02-02-2015, 07:55 AM
Replies: 24
Views: 20,352
Posted By Joe / APP Team
You're Very Welcome !!! Glad we could give you a...

You're Very Welcome !!!

Glad we could give you a hand, and get you up and running.

Thanks Again, and Good Luck
Forum: Microwave Repair 01-20-2015, 07:03 AM
Replies: 12
Views: 18,168
Posted By Joe / APP Team
Yes, we decided to use that model number when...

Yes, we decided to use that model number when researching for parts and locations, etc.

The part numbers for the thermostats are:

AP4564957
AP4564954

Once you access them, one thermostat will be...
Forum: Microwave Repair 01-19-2015, 07:55 AM
Replies: 12
Views: 18,168
Posted By Joe / APP Team
Thomas, The thermostats you're interested in are...

Thomas, The thermostats you're interested in are located on the bottom of the microwave cabinet, behind the control panel inside the component cavity. You'll need to remove the control panel to...
Forum: Dryer Repair 01-16-2015, 06:20 AM
Replies: 18
Views: 17,795
Posted By Joe / APP Team
Geotactic, under the circumstances, new dryer,...

Geotactic, under the circumstances, new dryer, new breaker rigid vent, overheating and tripping the breaker, you'll need to check for a shorted or pinched wire to the heater element or an element...
Forum: Washer Repair 01-15-2015, 02:22 PM
Replies: 24
Views: 20,352
Posted By Joe / APP Team
AKuhns, Ok , your meter has 200 ohms as the...

AKuhns, Ok , your meter has 200 ohms as the lowest resistance setting, Place the meter at 200 and recheck the CN9 pin 1 to 2, pin 1 to 3 and pin 2 to 3 you should have a resistance reading of 3 ohms...
Forum: Washer Repair 01-15-2015, 06:43 AM
Replies: 24
Views: 20,352
Posted By Joe / APP Team
AKuhns, You can set the multi meter resistance...

AKuhns, You can set the multi meter resistance setting wrong, and you will receive an "open" circuit reading if you do. You want to use the lowest setting possible, or the closest setting without...
Forum: Washer Repair 01-09-2015, 01:35 PM
Replies: 27
Views: 67,465
Posted By Joe / APP Team
Hardychas, Great, glad to hear you repaired your...

Hardychas, Great, glad to hear you repaired your washer. Apparently, you do have the talent for this sort of thing. Great Job and Good Luck
Forum: Washer Repair 01-02-2015, 07:26 AM
Replies: 16
Views: 26,269
Posted By Joe / APP Team
Dlrepp, Under certain installations (basements...

Dlrepp, Under certain installations (basements garages etc.) that can happen. As long as the washer cabinet is level, in both directions you're OK.

If the washer is higher in the back, it could...
Forum: Washer Repair 12-22-2014, 07:04 AM
Replies: 45
Views: 38,800
Posted By Joe / APP Team
Mguerrero, No, you don't have to lay the washer...

Mguerrero, No, you don't have to lay the washer on it's front panel. It does make it a bit easier to work with, but you can move the washer out and lean it against the wall and get under the washer...
Showing results 1 to 25 of 500

 
Forum Jump


All times are GMT -7. The time now is 01:33 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17