Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 500
Search took 0.09 seconds.
Search: Posts Made By: Joe / APP Team
Forum: Washer Repair 07-15-2014, 11:49 AM
Replies: 8
Views: 4,666
Posted By Joe / APP Team
Thorning, The best place to get your parts is...

Thorning,
The best place to get your parts is right here at AppliancePartspros.com. All parts purchased have a 365 day "no hassle" return policy, and they have a one year parts warranty as well.
In...
Forum: Washer Repair 07-14-2014, 07:59 AM
Replies: 8
Views: 4,666
Posted By Joe / APP Team
Thorning, No, you won't have to remove the outer...

Thorning, No, you won't have to remove the outer tub assembly, But you will need to remove the front of the washer, shroud, boot, tub cover and spin basket and shaft.

Presumably you mean this unit...
Forum: Washer Repair 05-28-2014, 12:12 PM
Replies: 30
Views: 20,433
Posted By Joe / APP Team
Nicholas, You may want to check the wires to the...

Nicholas, You may want to check the wires to the RPS switch and make sure they didn't get dislodged or knocked loose in the move. But that's the least of your worries. You'll have to do something...
Forum: Oven Repair (including Ranges and Cooktops) 05-12-2014, 06:04 AM
Replies: 11
Views: 3,958
Posted By Joe / APP Team
Dkraines, Great Job... Thanks for the update,...

Dkraines, Great Job... Thanks for the update, we're glad all went well for you.
Forum: Refrigerator & Freezer Repair 04-28-2014, 02:00 PM
Replies: 7
Views: 2,150
Posted By Joe / APP Team
Jesusman, Open the freezer drawer and remove the...

Jesusman, Open the freezer drawer and remove the baskets and check the back wall of the freezer compartment for a heavy frost or ice build up on the back wall, this will indicate a defrost problem,...
Forum: Dishwasher Repair 04-28-2014, 11:55 AM
Replies: 38
Views: 33,414
Posted By Joe / APP Team
Silkfur, You may not need a repairman. The...

Silkfur, You may not need a repairman. The previous post recommended you check voltage to the valve or replace the fill valve. When the repairman get's the dishwasher up and going, let us know what...
Forum: Oven Repair (including Ranges and Cooktops) 04-28-2014, 07:26 AM
Replies: 57
Views: 18,016
Posted By Joe / APP Team
gte037, You should not have 220 VAC on a wire,...

gte037, You should not have 220 VAC on a wire, especially at the element. You're testing it wrong or you have a wiring issue. There should be 120 VAC on the black L1 wire and 120 VAC on the red L2...
Forum: Oven Repair (including Ranges and Cooktops) 04-25-2014, 11:54 AM
Replies: 57
Views: 18,016
Posted By Joe / APP Team
GTE037, Yes, there is a possibility that the...

GTE037, Yes, there is a possibility that the switch contacts will get damaged, if the wires are incorrectly connected to the replacement switch. Chances are the switch is damaged, based on the...
Forum: Washer Repair 04-23-2014, 01:51 PM
Replies: 30
Views: 16,128
Posted By Joe / APP Team
Wash3r, Thanks, we understood that, but you'd be...

Wash3r, Thanks, we understood that, but you'd be surprised.

A really good post, thanks for the effort and time. Great job.

Thanks Again.
Forum: Washer Repair 04-23-2014, 01:50 PM
Replies: 30
Views: 16,128
Posted By Joe / APP Team
Wash3r, Thanks, we understood that, but you'd be...

Wash3r, Thanks, we understood that, but you'd be surprised.

A really good post, thanks for the effort and time. Great jog .

Thanks Again.
Forum: Washer Repair 04-23-2014, 12:32 PM
Replies: 30
Views: 16,128
Posted By Joe / APP Team
Wash3r, being a Sears/Kenmore machine, you're...

Wash3r, being a Sears/Kenmore machine, you're going to want to find and use the tech data sheet attached to the cabinet front panel interior. The methods and codes maybe the same as a Whirlpool...
Forum: Washer Repair 04-23-2014, 09:49 AM
Replies: 30
Views: 16,128
Posted By Joe / APP Team
Trisha, Like most everything else, despite the...

Trisha, Like most everything else, despite the flashing lights or LED's, which direct you to a possible cause for a malfunction, that's when the time and experience come into play, and that's where...
Forum: Washer Repair 04-23-2014, 07:45 AM
Replies: 30
Views: 16,128
Posted By Joe / APP Team
Kkgraham, Once you retrieve the tech data sheet,...

Kkgraham, Once you retrieve the tech data sheet, and review the information you'll be able to read and understand the display lights on the console, the light pattern(s) during the test mode, will...
Forum: Washer Repair 04-23-2014, 06:30 AM
Replies: 30
Views: 16,128
Posted By Joe / APP Team
Wash3r, Thanks for the input, it should be...

Wash3r, Thanks for the input, it should be helpful to others who decide to take on a DIY project. Your guess is correct, the tech data sheet and diagnosis information will vary by model or serial...
Forum: Dishwasher Repair 04-21-2014, 06:57 AM
Replies: 5
Views: 1,667
Posted By Joe / APP Team
Ghafoor, The first thing we need is a model umber...

Ghafoor, The first thing we need is a model umber of the dishwasher. That way we can advise you properly and what other possible issues there may be. In most cases, you'll find the tech data sheet...
Forum: Dishwasher Repair 04-08-2014, 06:35 AM
Replies: 38
Views: 33,414
Posted By Joe / APP Team
Silkfur, When you program into the test mode...

Silkfur, When you program into the test mode properly, the first thing to occur will be the dishwasher filling with water. You will need to use a multi meter, attach the meter leads to the terminals...
Forum: Washer Repair 04-07-2014, 11:43 AM
Replies: 21
Views: 39,363
Posted By Joe / APP Team
The black powdery substance is a bit worrisome, a...

The black powdery substance is a bit worrisome, a good indication that the shaft or bearings are worn, or something is out of alignment. But then, there should also be water marks or moisture inside...
Forum: Washer Repair 04-07-2014, 07:18 AM
Replies: 21
Views: 39,363
Posted By Joe / APP Team
Yes, it could be the cause of the F 51 code and...

Yes, it could be the cause of the F 51 code and the noise. If the tub hub doesn't engage the shaft hub properly, this can cause a "drag" on the drive system and create the F 51 error code. You also...
Forum: Washer Repair 03-31-2014, 08:07 AM
Replies: 21
Views: 39,363
Posted By Joe / APP Team
Kl, It's not likely the tub or basket. But you do...

Kl, It's not likely the tub or basket. But you do want to recheck the hub assembly

AP3892170

If the "teeth" on either of the hubs are distorted or "rounded off" or worn to the point that they can't...
Forum: Washer Repair 03-31-2014, 07:59 AM
Replies: 19
Views: 14,518
Posted By Joe / APP Team
mcclainms, The F54 code indicates an issue in the...

mcclainms, The F54 code indicates an issue in the drive system " F 54 Motor Control Overcurrent F then 54 flashes when the machine/motor control detects high current for the motor module. Does basket...
Forum: Dishwasher Repair 03-31-2014, 07:39 AM
Replies: 38
Views: 33,414
Posted By Joe / APP Team
Silkfur, The attached tech sheet, will give you...

Silkfur, The attached tech sheet, will give you the programming sequence for entering the test modes of the control board. But, it sounds more like you may have a failed fill valve...
Forum: Washer Repair 03-31-2014, 07:18 AM
Replies: 30
Views: 16,128
Posted By Joe / APP Team
Shade Tree, Thanks for the update information....

Shade Tree, Thanks for the update information. Low DC voltage, can be "tricky" to test for, and can give a lot of false readings. Quite often, you have to use the L1 power supply as a "common" ground...
Forum: Washer Repair 03-27-2014, 06:23 AM
Replies: 30
Views: 16,128
Posted By Joe / APP Team
ShadeTree, You've got it diagnosed properly, and...

ShadeTree, You've got it diagnosed properly, and ready to repair. Just remember to make sure you have a good tight fit on the connector and wires to the actuator when you install the part.
Forum: Washer Repair 03-26-2014, 08:31 AM
Replies: 21
Views: 39,363
Posted By Joe / APP Team
OK, Keep in touch, we'll get this washer going...

OK, Keep in touch, we'll get this washer going one way or another.
Forum: Washer Repair 03-26-2014, 07:00 AM
Replies: 21
Views: 39,363
Posted By Joe / APP Team
Klcannon, Just a small dab of grease on the...

Klcannon, Just a small dab of grease on the surface of the end of the impeller shaft, is all that's needed. the end of the shaft that seats in the rotor. When you installed the [AP4327312] sensor...
Showing results 1 to 25 of 500

 
Forum Jump


All times are GMT -7. The time now is 01:33 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17