Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 27
Search took 0.00 seconds.
Search: Posts Made By: melissourgos
Forum: Dishwasher Repair 12-06-2012, 04:46 AM
Replies: 48
Views: 11,341
Posted By melissourgos
Post I replaced the water like with the one you...

I replaced the water like with the one you suggested, but it still does not get enough water. Where should the water level be to the filter when it initially starts?
Is there a possibility that...
Forum: Dishwasher Repair 11-30-2012, 11:41 PM
Replies: 48
Views: 11,341
Posted By melissourgos
To the garbage disposal outlet for the dishwasher...

To the garbage disposal outlet for the dishwasher where its been for like 9 years.
Do u think there is garbage on the line or something happened when i laid it down to change the heater. But i...
Forum: Dishwasher Repair 11-30-2012, 07:48 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post Ok. Thanks. But now there seems to be a problem w...

Ok. Thanks. But now there seems to be a problem w draining the water. I run the test
Program and although it seems as if the pump is running properly, sometimes it empties the water and sometimes it...
Forum: Dishwasher Repair 11-30-2012, 03:00 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post The water valve is open all the way. But i did...

The water valve is open all the way. But i did replace the copper line
Going to the dishwasher with a flexible pvc line. It seems as the diameter on that
One is smaller than the copper pipe, so if...
Forum: Dishwasher Repair 11-28-2012, 07:19 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post Couldnt find any either, but i did run the...

Couldnt find any either, but i did run the machine and there is barely any water
In it. How do i go about solving that?
Forum: Dishwasher Repair 11-28-2012, 04:42 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post If that model has 3 washing arms then I am...

If that model has 3 washing arms then I am missing one the one on the roof of the machine. That would explain why it does not clear the dispenser cause it does not build up enough pressure. Pls let...
Forum: Dishwasher Repair 11-28-2012, 01:46 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post I replaced the heater and the machine it goes...

I replaced the heater and the machine it goes thru the cycle without any
problems. But it does not desolve all the detergent in the dispenser.
This is odd cause it has never done this before. If you...
Forum: Dishwasher Repair 11-07-2012, 07:43 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post yes the wires were removed. does the bottom of...

yes the wires were removed.

does the bottom of the dishwasher need to be removed to replace the heater?
Forum: Dishwasher Repair 11-06-2012, 05:31 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post This is what I came up with starting at the...

This is what I came up with starting at the lowest ohm setting and moving up if needed.

Heater: OL at all settings
Flow switch removed from the heater : 000.0 ohms
NTC: 57.8 Kohms
Hi-limit: never...
Forum: Dishwasher Repair 11-06-2012, 09:42 AM
Replies: 48
Views: 11,341
Posted By melissourgos
Post Thanks for the documentation, but what i really...

Thanks for the documentation, but what i really need to know is how to
chk the NTC cause there two sets of wires going to it (2 red and 2 green). can you please tell me how to chk that? Thanks.
Forum: Dishwasher Repair 11-02-2012, 05:50 PM
Replies: 48
Views: 11,341
Posted By melissourgos
I could not download the info you sent me as of...

I could not download the info you sent me as of yet, but this is what I came up using a klein c1000 multimeter and a test light.
when checking the heater at all ohms settings i get .OL and the test...
Forum: Dishwasher Repair 10-31-2012, 07:15 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post yes sir. and installed it.

yes sir. and installed it.
Forum: Dishwasher Repair 10-31-2012, 06:01 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post when the water starts circulating during the test...

when the water starts circulating during the test program it only pulls 1.1A, so I obviously have to check the heater, hi-lmit and flowswitch. Do I have to remove tank or block it up if I can reach...
Forum: Dishwasher Repair 10-24-2012, 07:35 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post so, the coding plug or jumper or wharever u want...

so, the coding plug or jumper or wharever u want to call it, could be the whole problem. unfortunately the new control panel did not come with that instruction. oh well.
Forum: Dishwasher Repair 10-24-2012, 04:32 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post The coding plug is missing. what is the effect of...

The coding plug is missing. what is the effect of that?
Also, I did not get any measurement between the two wires.
Should I pull the unit out and check the heater? is there two elements or one in...
Forum: Dishwasher Repair 10-23-2012, 07:37 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post Also, does this model have a module jumper?if so,...

Also, does this model have a module jumper?if so, I don't seem to have one. This control module was purchased towards the beginning of this year. Not sure if the old one had one and not aware I had...
Forum: Dishwasher Repair 10-23-2012, 07:23 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post How exactly do I do that cause it's not very...

How exactly do I do that cause it's not very clear on the diagram and what kind of results am I looking for on the multimeter?
Forum: Dishwasher Repair 10-23-2012, 04:13 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post I checked the drain motor and the NTC. They both...

I checked the drain motor and the NTC. They both seem fine. I put the probes on the two brown wires as per diagram to chk the NTC.
Is there a way to check the heater without pulling off the right...
Forum: Dishwasher Repair 10-17-2012, 04:47 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post Thanks for your reply. i have not done the tests...

Thanks for your reply. i have not done the tests yet but I did run the machine in the test mode and it did drain, fill up and start running. I stoped the test mode and just run the regular wash. It...
Forum: Dishwasher Repair 10-16-2012, 03:30 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post measurements

Have to admit that i am very novice on taking measurements, so lets see if i would do this right: dishwasher has to be in test mode? or if not, should the power be off?

Looking at the testing...
Forum: Dishwasher Repair 10-16-2012, 05:05 AM
Replies: 48
Views: 11,341
Posted By melissourgos
Post will assume that i will need a digital meter to...

will assume that i will need a digital meter to properly do that.
Forum: Dishwasher Repair 10-13-2012, 04:54 AM
Replies: 48
Views: 11,341
Posted By melissourgos
Post More Issues

I replaced the motor and impeller on the shu4302 but it obviously has other issues as well. The machine was on the wash cycle from when the motor burned and since i had vacuumed the water out, I...
Forum: Dishwasher Repair 10-03-2012, 05:54 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post Can you possibly resend the documents in .pdf...

Can you possibly resend the documents in .pdf format so i can open them. Thanks
Forum: Dishwasher Repair 10-03-2012, 08:10 AM
Replies: 48
Views: 11,341
Posted By melissourgos
Post I took both side panels off and I noticed that...

I took both side panels off and I noticed that the sound was coming from the motor on the right side towards the front of the dishwasher. The motor was hot. It stoped making the noise when I removed...
Forum: Dishwasher Repair 09-28-2012, 08:31 PM
Replies: 48
Views: 11,341
Posted By melissourgos
Post If by chance the noise comes from the control...

If by chance the noise comes from the control panel, I will assume that will indicate that it needs to be replaced. Thanks for all ur help.
Showing results 1 to 25 of 27

 
Forum Jump


All times are GMT -7. The time now is 10:49 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17