Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 10 of 10
Search took 0.00 seconds.
Search: Posts Made By: dclange
Forum: Refrigerator & Freezer Repair 07-30-2013, 12:06 PM
Replies: 10
Views: 938
Posted By dclange
When I short the meter leads together I get a...

When I short the meter leads together I get a zero offset of 0.01 When I put the leads across the overload terminals I get 0.03 . I have another frig with the same type/shape overload that runs...
Forum: Refrigerator & Freezer Repair 07-29-2013, 08:00 PM
Replies: 10
Views: 938
Posted By dclange
Ok, tried three times plugging in frig when cold,...

Ok, tried three times plugging in frig when cold, compressor runs great, takes freezer temp down to -10 set on the middle setting of 3. After two or three hours the compressor starts that...
Forum: Refrigerator & Freezer Repair 07-27-2013, 01:09 PM
Replies: 10
Views: 938
Posted By dclange
Ok guys, got start device yesterday, and put it...

Ok guys, got start device yesterday, and put it on, plugged in frig, compressor took right running. :) Set dial to coldest setting 9 and put thermometer in the freezer compartment. Checked 6 hours...
Forum: Refrigerator & Freezer Repair 07-25-2013, 01:53 PM
Replies: 10
Views: 938
Posted By dclange
Thanks for the replies! Richappy, I guess your...

Thanks for the replies! Richappy, I guess your saying the compressor could still be bad? I also tested for continuity between all the pins and they all have continuity. Denman, when I tested for a...
Forum: Refrigerator & Freezer Repair 07-24-2013, 11:01 AM
Replies: 10
Views: 938
Posted By dclange
Is this compressor bad or not?

Compressor, good or bad, 14.3 ohm's across bottom two pins, 10.9 ohm's
between top pin and bottom left, 4.0 ohm's between top pin and bottom right. Is this compressor good or bad? Tested all pins...
Forum: Refrigerator & Freezer Repair 12-15-2012, 08:11 AM
Replies: 7
Views: 1,479
Posted By dclange
Ok, received start device, installed on frig,...

Ok, received start device, installed on frig, zip, nothing. Lights and both fans still work, but still no compressor. So not the start device. From reading this forum, I figured take a look at the...
Forum: Refrigerator & Freezer Repair 12-13-2012, 08:18 AM
Replies: 7
Views: 1,479
Posted By dclange
Thank you for repling. The start device has been...

Thank you for repling. The start device has been ordered and is on its way. When it gets here, I will install and let you know what happens! ;)
Forum: Refrigerator & Freezer Repair 12-12-2012, 02:59 PM
Replies: 7
Views: 1,479
Posted By dclange
Hello?????

Hello?????
Forum: Refrigerator & Freezer Repair 12-12-2012, 09:22 AM
Replies: 7
Views: 1,479
Posted By dclange
Thanks for the reply Richappy! I will order the...

Thanks for the reply Richappy! I will order the parts today from this site. Still, just curious if I did the testing right, are the readings on the compressor within range, the test good? The...
Forum: Refrigerator & Freezer Repair 12-11-2012, 04:29 PM
Replies: 7
Views: 1,479
Posted By dclange
Unhappy Refrigerator not cooling, fans and lights work

Model GSS25JEMACC, GE March, 2001
Quit cooling. The Evaporator and Condenser fans both run, lights work. The compressor will not kick on. Pulled off the overload and start relay and run a couple...
Showing results 1 to 10 of 10

 
Forum Jump


All times are GMT -7. The time now is 10:13 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17