Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 392
Search took 0.03 seconds.
Search: Posts Made By: Frank / APP Team
Forum: Refrigerator & Freezer Repair 09-27-2012, 01:09 PM
Replies: 6
Views: 1,472
Posted By Frank / APP Team
Jamosteve, I'm going to take a stab at this...

Jamosteve,

I'm going to take a stab at this and throw a few things for you to check.

When you jump it out the valve should stay energized for approximately 7 to 7.5 seconds. I would check it at...
Forum: Oven Repair (including Ranges and Cooktops) 01-20-2012, 10:51 AM
Replies: 1
Views: 911
Posted By Frank / APP Team
Hello, You won't be able to get a new wiring...

Hello,

You won't be able to get a new wiring harness for the wall oven but replacing the burnt wiring is certainly an option. Replacing the wire connectors on the ends of the wire is usually a...
Forum: Dryer Repair 11-28-2011, 05:38 AM
Replies: 1
Views: 1,087
Posted By Frank / APP Team
Jerry with the symptoms you've described your...

Jerry with the symptoms you've described your best bet is going to be replacing the coils. It's not a thermostat related problem. They only come into play when you've got flame and heat. Coils are a...
Forum: Washer Repair 05-03-2010, 11:07 AM
Replies: 1
Views: 1,324
Posted By Frank / APP Team
Replacement parts for MAYTAG LA412 Washer - Top...

Replacement parts for MAYTAG LA412 Washer - Top Loading | AppliancePartsPros.com (http://www.appliancepartspros.com/partsearch/model.aspx?model_id=28894)

Here is the link to the parts breakdown. ...
Forum: Dryer Repair 04-29-2010, 07:29 AM
Replies: 1
Views: 968
Posted By Frank / APP Team
Mike, Don't know what scale you've got your...

Mike,

Don't know what scale you've got your meter set on, but the ohms on your element should be in the 10 neighborhood. Here's the calculation for ohms, (volts x volts / wattage= ohms). The...
Forum: Dishwasher Repair 02-12-2010, 06:54 AM
Replies: 2
Views: 10,085
Posted By Frank / APP Team
If you're hearing a humming noise when it should...

If you're hearing a humming noise when it should be draining it sounds like you're getting power to the drain pump. Probably need to look at the pump and see if something may be stuck in it. If...
Forum: Washer Repair 12-04-2009, 11:00 AM
Replies: 10
Views: 1,595
Posted By Frank / APP Team
Glad to help. We'd sure like to sell you one! ...

Glad to help. We'd sure like to sell you one!

AP3963893
Forum: Dryer Repair 12-04-2009, 10:01 AM
Replies: 1
Views: 647
Posted By Frank / APP Team
If the ignitor glows and then fades away without...

If the ignitor glows and then fades away without ignition, the usual culprit are the coils on the gas valve. See below.

AP3094251
Forum: Washer Repair 12-04-2009, 09:30 AM
Replies: 10
Views: 1,595
Posted By Frank / APP Team
Well, my first thought is still the coupler, but...

Well, my first thought is still the coupler, but I know you've checked it.

I guess the next thing to do is remove the pump and motor again and hand turn the the transmission both directions and...
Forum: Washer Repair 12-04-2009, 07:39 AM
Replies: 10
Views: 1,595
Posted By Frank / APP Team
Below is a manual that may help you. If you're...

Below is a manual that may help you. If you're sure it isn't the coupler, then you may want to start reading pg 13 forward.


http://appliancejunk.com/directdrivemanual.pdf
Forum: Washer Repair 12-03-2009, 01:42 PM
Replies: 4
Views: 1,747
Posted By Frank / APP Team
You're welcome. Glad we could help.

You're welcome. Glad we could help.
Forum: Washer Repair 12-03-2009, 11:10 AM
Replies: 4
Views: 1,747
Posted By Frank / APP Team
You may want to try the below. Hope that does...

You may want to try the below.

Hope that does it for you.

To unlock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds until the
CONTROL LOCKED status light turns off..

Refer to...
Forum: Refrigerator & Freezer Repair 11-04-2009, 11:58 AM
Replies: 2
Views: 1,036
Posted By Frank / APP Team
It sounds like you have a clogged drain for one. ...

It sounds like you have a clogged drain for one. If your defrost water isn't going down the drain and it's building up in the trough that will cause the ice build up in the bottom of the unit. You...
Forum: Oven Repair (including Ranges and Cooktops) 11-03-2009, 12:17 PM
Replies: 2
Views: 668
Posted By Frank / APP Team
F3 or F4 Open or shorted oven temperature sensor...

F3
or
F4 Open or shorted oven temperature sensor (RTD) Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor if wiring is ok. See below.
...
Forum: Refrigerator & Freezer Repair 11-03-2009, 11:57 AM
Replies: 2
Views: 788
Posted By Frank / APP Team
Sounds like the door wasn't closed and the lights...

Sounds like the door wasn't closed and the lights didn't go out. Can't think of any other failure that would cause the freshfood section to get hot and the freezer to stay cold. Usually that would...
Forum: Dryer Repair 10-28-2009, 01:24 PM
Replies: 1
Views: 479
Posted By Frank / APP Team
My first thoughts would be that the thermal fuse...

My first thoughts would be that the thermal fuse is tripped, which is keeping it from starting, along with a grounded heating element. If the element has grounded out it would partially heat when...
Forum: Washer Repair 10-28-2009, 12:23 PM
Replies: 1
Views: 549
Posted By Frank / APP Team
Click the below link and look at page 3-6. I...

Click the below link and look at page 3-6. I believe that will assist you.

http://servicematters.com/maytag_library/docs/16023083.pdf
Forum: Washer Repair 10-28-2009, 12:08 PM
Replies: 1
Views: 579
Posted By Frank / APP Team
Probably the first part to look at would be the...

Probably the first part to look at would be the lid switch assembly. You can access it through the control panel. If one of the switches are bad it will prohibit the machine from running. You'll...
Forum: Washer Repair 10-28-2009, 06:20 AM
Replies: 2
Views: 508
Posted By Frank / APP Team
If the water flow coming out of the hot and cold...

If the water flow coming out of the hot and cold hose is equal prior to hooking them up to the valve, then you have a bad valve, or the screen in the valve that's slow is partially clogged. If the...
Forum: Washer Repair 10-27-2009, 08:51 AM
Replies: 2
Views: 1,709
Posted By Frank / APP Team
Can't tell you whether it's worth it or not but...

Can't tell you whether it's worth it or not but it is one of the easier transmissions to work on. You can lay the machine on it's back with the trans cover facing up and remove the screws that hold...
Forum: Dryer Repair 10-27-2009, 08:01 AM
Replies: 2
Views: 1,309
Posted By Frank / APP Team
That's a pretty odd occurance. So what do you...

That's a pretty odd occurance. So what do you have to do to stop the flow of gas?
Forum: Dryer Repair 10-26-2009, 01:22 PM
Replies: 1
Views: 485
Posted By Frank / APP Team
Any noise at all when you hit the start button? ...

Any noise at all when you hit the start button? If it's completely dead, make sure you check the house breaker. From there you should probably check the thermal fuse which is located on the blower...
Forum: Washer Repair 10-26-2009, 01:14 PM
Replies: 1
Views: 1,116
Posted By Frank / APP Team
There is a small screw on the side of the...

There is a small screw on the side of the agitator, right about where the barrel part and the flared area come together. Which way it's currently facing when the machined stopped last, I can't...
Forum: Dryer Repair 10-26-2009, 12:31 PM
Replies: 7
Views: 2,123
Posted By Frank / APP Team
Did you check the door switch? Common to...

Did you check the door switch? Common to normally open is for the run circuit, common to normally closed is the light? So with the switch pressed in C to NO should show continuity.

Have you...
Forum: Dryer Repair 10-26-2009, 11:17 AM
Replies: 7
Views: 2,123
Posted By Frank / APP Team
Below is a picture of the thermal fuse kit. It...

Below is a picture of the thermal fuse kit. It is located on the heating element.

AP4242472
Showing results 1 to 25 of 392

 
Forum Jump


All times are GMT -7. The time now is 04:27 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17