Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 137
Search took 0.03 seconds.
Search: Posts Made By: Chris_Polk
Forum: Washer Repair 06-20-2012, 08:03 AM
Replies: 5
Views: 1,736
Posted By Chris_Polk
Unit

Congrats! Sometimes it takes a little investigative work to get to the bottom of the issue. I have unclogged many socks and little hand towel pieces from my drain pipes and hose. I tend to check it...
Forum: Dryer Repair 06-19-2012, 09:37 AM
Replies: 8
Views: 2,173
Posted By Chris_Polk
Residue

That is one way, or you can simply use a hair dryer on the vent and see if it will help loosen, by melting, the area. You may also use a household remedy I suggest all the time, on just about...
Forum: Washer Repair 06-19-2012, 09:34 AM
Replies: 5
Views: 1,736
Posted By Chris_Polk
E23

Yes, check to make sure everything is free and clear of debris, and then look into the Main Control Board or it's wiring. That is what is causing your new E23 error code.
Forum: Washer Repair 06-18-2012, 01:11 PM
Replies: 5
Views: 1,736
Posted By Chris_Polk
Washer

Sounds like the unit was overloading and it strained the pulley/bearing system behind the drum. If a unit does not spin it is because of a broken belt, or it cannot drain. It will not spin, and sling...
Forum: Dryer Repair 06-18-2012, 12:39 PM
Replies: 8
Views: 2,173
Posted By Chris_Polk
Residue

This actually can be from the detergent and/or softener you use. Also, if any clothes have gotten caught on the back vent when drying and have melted somewhat on the vent/duct area. Have you noticed...
Forum: Dishwasher Repair 06-15-2012, 09:29 AM
Replies: 1
Views: 1,117
Posted By Chris_Polk
Lights

Do you see any error code on the display? And what lights flash?
Forum: Washer Repair 06-11-2012, 11:35 AM
Replies: 2
Views: 970
Posted By Chris_Polk
Code

E71 indicates "Wash NTC failure- (tub heater)" - you will need to swap hot and cold hoses, and then retry the unit.
Forum: Washer Repair 06-11-2012, 11:28 AM
Replies: 3
Views: 736
Posted By Chris_Polk
Codes

E41 indicates that you are experiencing an issue with the door switch and main control board. A service professional is needed to complete the following:

1. Is the loading door closed? No, close the...
Forum: Washer Repair 06-05-2012, 01:37 PM
Replies: 1
Views: 1,928
Posted By Chris_Polk
Model

Unfortunately you cannot find the model number based upon a part number, since many Frigidaire units use the same one. Do you know if you registered the appliance with Frigidaire upon purchase? They...
Forum: Washer Repair 06-04-2012, 09:11 AM
Replies: 1
Views: 758
Posted By Chris_Polk
Washer

With this unit, being a top load, you are going to need to take the unit apart from behind and then tilt backwards to get underneath the unit to the filter or drain pump. There should be a trap, or...
Forum: Washer Repair 06-04-2012, 09:09 AM
Replies: 1
Views: 571
Posted By Chris_Polk
Door

Check to see if the door is sagging at all or not aligned correctly to the door latch and door strike.
Forum: Refrigerator & Freezer Repair 06-04-2012, 09:06 AM
Replies: 1
Views: 807
Posted By Chris_Polk
Connection

There must be a connection error between the control board and defrost circuit. Have the repair tech come back out if it has been within 30 days of them last repairing the unit. They typically...
Forum: Refrigerator & Freezer Repair 05-21-2012, 12:15 PM
Replies: 1
Views: 765
Posted By Chris_Polk
Smell

Well sounds like you have tried to clean everything you possibly can get your hands on, which is good. My only suggestion is using kitty litter in a bowl, similar to how you used coffee grounds. You...
Forum: Dryer Repair 05-17-2012, 09:06 AM
Replies: 6
Views: 1,433
Posted By Chris_Polk
Rich, if you feel up to repairing the unit...

Rich, if you feel up to repairing the unit yourself then you'll need a new main control board. This is stated in Frigidaire's technical guide for all of their field technicians. If you need a part...
Forum: Dryer Repair 05-16-2012, 11:48 AM
Replies: 6
Views: 1,433
Posted By Chris_Polk
E68

For this error code, with this manufacturer, does indeed mean you have a stuck key or button function. However, if you continue to experience the E68 code, then means the main control board is faulty...
Forum: Washer Repair 05-11-2012, 12:17 PM
Replies: 1
Views: 797
Posted By Chris_Polk
No Spin

From what you have described and what you have already installed, did you ever notice an alpha-numeric error code, flashing lights, or audible beeps on the appliance prior to the repairs?

Typically...
Forum: Microwave Repair 05-09-2012, 09:11 AM
Replies: 5
Views: 1,524
Posted By Chris_Polk
Microwave

Paul, no problem. Stay in touch I am curious to see what exactly is the root culprit and see if I can help any other way. If you need a parts break down on the unit I do have one, but I have to email...
Forum: Microwave Repair 05-09-2012, 06:04 AM
Replies: 5
Views: 1,524
Posted By Chris_Polk
Microwave

Thanks for getting back with me to clarify. If the unit works "sometimes" but needs a little extra help with holding or pushing the door a certain way I am leaning towards a possibly interlock, door...
Forum: Microwave Repair 05-08-2012, 01:29 PM
Replies: 5
Views: 1,524
Posted By Chris_Polk
No heat

If the unit will turn on, light up and possibly rotate the table, just won't heat you have a magnetron issue. It has completely gone out on you. Now most manufacturers have a limited part warranty on...
Forum: Oven Repair (including Ranges and Cooktops) 05-03-2012, 12:19 PM
Replies: 4
Views: 1,848
Posted By Chris_Polk
Screws

That could very well be the screws on your specific units under the caps. Some units are produced that way. I would think the insulation and bottom layer, closest to the floor, is fine from what you...
Forum: Oven Repair (including Ranges and Cooktops) 05-02-2012, 11:46 AM
Replies: 4
Views: 1,848
Posted By Chris_Polk
Replace

With such a case you are looking at replacing the bottom panel, heat shield and two other layers in the bottom of the unit if at all they were damaged as well. The parts you need are...
Forum: Refrigerator & Freezer Repair 04-30-2012, 02:26 PM
Replies: 1
Views: 989
Posted By Chris_Polk
Part EAP463032

I would personally contact a local service technician or appliance company to see if they recommend anyone with older appliances. I have also researched Frigidaire and their part distributors and...
Forum: Washer Repair 04-30-2012, 12:57 PM
Replies: 2
Views: 1,196
Posted By Chris_Polk
Spin

Typically final spin is at a higher RPM speed than other spinning cycles throughout the entire clean cycle. You might have enough RPM speed to keep the banging from happening at the end of a cycle...
Forum: Washer Repair 04-30-2012, 07:49 AM
Replies: 4
Views: 4,711
Posted By Chris_Polk
For most models it will not spin if the pump is...

For most models it will not spin if the pump is bad or has issues. Let me know if you run the diagnostic testing and what the outcome was/is. If you have no luck unfortunately Frigidaire has a great...
Forum: Washer Repair 04-27-2012, 09:31 AM
Replies: 4
Views: 4,711
Posted By Chris_Polk
no spin

Often when units do not spin it is due to a draining problem. The units are designed to not spin if they cannot drain. This would cause overflowing and leaking. You could have a drain pump or drain...
Showing results 1 to 25 of 137

 
Forum Jump


All times are GMT -7. The time now is 04:32 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17