Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 500
Search took 0.15 seconds.
Search: Posts Made By: sidfink43
Forum: Washer Repair Yesterday, 02:27 PM
Replies: 5
Views: 225
Posted By sidfink43
Great, glad you persisted and got them to fix...

Great, glad you persisted and got them to fix it.

Thanks for the update.
Forum: Washer Repair Yesterday, 05:18 AM
Replies: 3
Views: 150
Posted By sidfink43
Great diagnosis, let us know how it turns out.

Great diagnosis, let us know how it turns out.
Forum: Washer Repair 07-23-2014, 07:00 PM
Replies: 3
Views: 150
Posted By sidfink43
Since the machine will function after you clear...

Since the machine will function after you clear the error code you are correct in suspecting the CCU.

It is an an expensive part so if you order from this site and change it out and it is not the...
Forum: Washer Repair 07-23-2014, 06:58 PM
Replies: 1
Views: 130
Posted By sidfink43
There are three potential causes 1. The washer...

There are three potential causes

1. The washer is not spinning fast enough.

2. The pump is partially broken

3. There is an obstruction in the drain from the tub to the pump, in the pump or in...
Forum: Washer Repair 07-22-2014, 07:02 PM
Replies: 1
Views: 120
Posted By sidfink43
I am assuming the machine goes through the wash...

I am assuming the machine goes through the wash cycle completely, fill, agitate, drain and spin. In that case the problem is likely with the timer. Replace it and see if that fixes things.
Forum: Washer Repair 07-22-2014, 06:58 PM
Replies: 1
Views: 86
Posted By sidfink43
It is almost impossible for us to diagnose a...

It is almost impossible for us to diagnose a noise problem like this without being there to hear it.

If it is truly bothersome then I would change out the valve assembly; otherwise if it is not...
Forum: Washer Repair 07-22-2014, 04:42 PM
Replies: 8
Views: 263
Posted By sidfink43
Okay, if you will take off the front panel which...

Okay, if you will take off the front panel which you can do by placing a thin flat head screw driver or putty knife in the gap between the top and front near the edges to release the clips that hold...
Forum: Washer Repair 07-21-2014, 07:08 PM
Replies: 1
Views: 100
Posted By sidfink43
It may be that there is leakage in the...

It may be that there is leakage in the detergent/softener drawer and also that some of the lines to the washer are clogged. Check that out first and if that is not the problem try changing out the...
Forum: Washer Repair 07-21-2014, 07:00 PM
Replies: 3
Views: 182
Posted By sidfink43
Normally this is a clutch problem. Here is the...

Normally this is a clutch problem. Here is the part and there is a video that will show you how to change it out. It is not a difficult task but it helps to have a helper and it will take some...
Forum: Washer Repair 07-21-2014, 06:58 PM
Replies: 2
Views: 172
Posted By sidfink43
Since it will spin out in other cycle that...

Since it will spin out in other cycle that suggests there is nothing mechanically wrong with the machine and that the timer is at fault.

Try changing it out, and if you buy from this site and that...
Forum: Washer Repair 07-20-2014, 01:20 PM
Replies: 1
Views: 167
Posted By sidfink43
By pass the lid switch and operate it with the...

By pass the lid switch and operate it with the cabinet off. See if the clutch is turning. If it is not, and I suspect it is not then the problem is likely in the transmission.

It could also be...
Forum: Washer Repair 07-17-2014, 04:28 PM
Replies: 4
Views: 260
Posted By sidfink43
Well until I got to your second paragraph I was...

Well until I got to your second paragraph I was going to say replace the timer.

There doesn't seem to be anything mechanically wrong with the machine as it will do the light cycle when starting...
Forum: Washer Repair 07-17-2014, 04:21 PM
Replies: 1
Views: 184
Posted By sidfink43
This model has a separate belt to drive the pump....

This model has a separate belt to drive the pump. Check the belt to make sure it is not broken or slipping and check the drain line inside the machine and the pump for blockage.

If the machine is...
Forum: Washer Repair 07-17-2014, 04:17 PM
Replies: 1
Views: 224
Posted By sidfink43
Check under the top or inside the lower service...

Check under the top or inside the lower service panel for tech notes. They will tell you how to interpret the error code and how to test some components.

If you still need help please post a model...
Forum: Washer Repair 07-17-2014, 04:15 PM
Replies: 1
Views: 191
Posted By sidfink43
Take the back and top off and see if the support...

Take the back and top off and see if the support struts are broken. Unfortunately there may be damage that you cannot see and you may want to try replacing them on speculation.

Also check the...
Forum: Washer Repair 07-17-2014, 04:13 PM
Replies: 1
Views: 140
Posted By sidfink43
I can only think that you either damaged the tub...

I can only think that you either damaged the tub seal while installing it, that is easy to do, or that you received a bad tub seal.

I am afraid you may have to do that part of the job over...
Forum: Washer Repair 07-14-2014, 05:41 PM
Replies: 8
Views: 263
Posted By sidfink43
I don't know because we do not have a good model...

I don't know because we do not have a good model number for your machine. If you will post a model number you can look at an exploded view of your model and see what it looks like inside. You...
Forum: Washer Repair 07-14-2014, 04:50 PM
Replies: 1
Views: 174
Posted By sidfink43
I sounds like your switch is bad, here is a link...

I sounds like your switch is bad, here is a link to the service manual which discussed the switch on page 36.

http://www.emaservicetips.com/pdfs/489_5.pdf

Go ahead and replace it, and if you buy...
Forum: Washer Repair 07-13-2014, 06:00 AM
Replies: 8
Views: 263
Posted By sidfink43
If you have a traditional GE top loader than it...

If you have a traditional GE top loader than it has a proprietary connection to the washer.

I now understand your problem and have dealt with the issue personall by taping a leg length of panty...
Forum: Washer Repair 07-12-2014, 07:03 PM
Replies: 3
Views: 189
Posted By sidfink43
You can see if the motor is trying to turn and it...

You can see if the motor is trying to turn and it is the transmission that is stopping it, or if the motor is not turning, even with the belt off and the smell is from the motor overheating.
Forum: Washer Repair 07-12-2014, 07:02 PM
Replies: 3
Views: 209
Posted By sidfink43
Can't really tell without being there. Operate...

Can't really tell without being there. Operate it with the front panel off and see if you can tell if the problem is with the drum banging around or if the noise is from some other source.
Forum: Washer Repair 07-12-2014, 06:02 PM
Replies: 3
Views: 189
Posted By sidfink43
Run it with the front panel off and then notice...

Run it with the front panel off and then notice if it is the transmission or the motor that is causing the problem. It sounds like it is one or the other and since you have the burning sensation I...
Forum: Washer Repair 07-12-2014, 05:56 PM
Replies: 1
Views: 213
Posted By sidfink43
Well first of all I am still trying to figure out...

Well first of all I am still trying to figure out the deal with buying the protection plan and then not having them fix it and giving you your money back. I think you should have raised holy hell...
Forum: Washer Repair 07-12-2014, 05:51 PM
Replies: 1
Views: 157
Posted By sidfink43
I think it is that seal but get your model number...

I think it is that seal but get your model number and use it to see exploded views of your machine and the parts that you might need.

Here is a link to a repair manual for a top loader Frigidaire,...
Forum: Washer Repair 07-12-2014, 05:47 PM
Replies: 8
Views: 263
Posted By sidfink43
That is really not a GE model number. Try to get...

That is really not a GE model number. Try to get the right number and then I would call APP on Monday and talk with the parts department about getting a new hose. I don't think though that you...
Showing results 1 to 25 of 500

 
Forum Jump


All times are GMT -7. The time now is 09:40 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17