Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 500
Search took 0.08 seconds.
Search: Posts Made By: fairbank56
Forum: Dryer Repair Today, 10:04 AM
Replies: 1
Views: 24
Posted By fairbank56
Why are you starting a new thread??? Did you...

Why are you starting a new thread??? Did you clean the sensor bars as I advised in your original thread?

http://forum.appliancepartspros.com/dryer-repair/555766-auto-dry-will-not-advance.html

Eric
Forum: Dryer Repair Today, 09:41 AM
Replies: 1
Views: 35
Posted By fairbank56
Timer terminals A orange B red, and black...

Timer terminals

A orange

B red, and black wire from drum lamp

C white (2)(one from buzzer) and black wire from timer motor (either one)

TM black wire from timer motor (either one), and one...
Forum: Washer Repair Today, 05:35 AM
Replies: 2
Views: 67
Posted By fairbank56
If the fuse was blown, you wouldn't see the...

If the fuse was blown, you wouldn't see the blinking LED. You can't hook up a test cord to the motor. The inverter board above the motor produces a 340 volt DC pulse width modulated "synthetic AC" 3...
Forum: Dryer Repair Yesterday, 09:39 AM
Replies: 25
Views: 371
Posted By fairbank56
Don't know, link doesn't work. We never recommend...

Don't know, link doesn't work. We never recommend buying appliance parts from e bay or amazon.

Eric
Forum: Dryer Repair Yesterday, 08:33 AM
Replies: 25
Views: 371
Posted By fairbank56
Yes, you should replace the timer. You can switch...

Yes, you should replace the timer. You can switch it back the way it was but you said you never used auto cycle. The only difference between timed dry and auto dry is the way in which the timer motor...
Forum: Dryer Repair Yesterday, 07:48 AM
Replies: 1
Views: 52
Posted By fairbank56
Yes, the moisture sensor control operates the...

Yes, the moisture sensor control operates the timer in auto mode. Check the moisture sensing bars in the drum. Probably just need cleaning. If they are gunked up, they will short out and control...
Forum: Dryer Repair Yesterday, 07:36 AM
Replies: 25
Views: 371
Posted By fairbank56
The timer motor must be faulty. The way you have...

The timer motor must be faulty. The way you have it connected now, when the dryer is running, there is power to the timer motor all the time which means it should advance normally until it shuts the...
Forum: Washer Repair Yesterday, 07:27 AM
Replies: 3
Views: 134
Posted By fairbank56
Again, I need the model number of the washer to...

Again, I need the model number of the washer to be of any help.

Eric
Forum: Washer Repair 09-19-2014, 03:10 PM
Replies: 3
Views: 134
Posted By fairbank56
Probably normal, what is the model number. Most...

Probably normal, what is the model number. Most new washers use low water levels due to government regulations.

Eric
Forum: Washer Repair 09-17-2014, 07:04 PM
Replies: 24
Views: 829
Posted By fairbank56
Glad to help out. Good job on persevering and...

Glad to help out. Good job on persevering and getting it fixed. Your an expert on that transmission now.

Eric
Forum: Dryer Repair 09-17-2014, 11:30 AM
Replies: 1
Views: 100
Posted By fairbank56
Faulty motor and grounded heater...

Faulty motor and grounded heater element.

Frigidaire 134196600 Dryer Drive Motor with Pulley - AppliancePartsPros.com...
Forum: Washer Repair 09-17-2014, 06:57 AM
Replies: 24
Views: 829
Posted By fairbank56
The metal cam spring goes on the outside of the...

The metal cam spring goes on the outside of the cam.

Eric

http://home.comcast.net/~fairbank56/WhirlpoolSpinGearCam.jpg
Forum: Washer Repair 09-16-2014, 07:32 PM
Replies: 3
Views: 179
Posted By fairbank56
Best for you to remove the cabinet again. I could...

Best for you to remove the cabinet again. I could do it by tilting the machine back but I know what I'm looking/feeling for.

With this wire disconnected, there is no neutral to the motor or to the...
Forum: Washer Repair 09-16-2014, 07:22 PM
Replies: 24
Views: 829
Posted By fairbank56
Don't know really what to tell you. Can't...

Don't know really what to tell you. Can't troubleshoot it from here. Might be able to see better if you take the everything off but the actuator. Either the tang on the actuator isn't engaging the...
Forum: Washer Repair 09-16-2014, 06:57 PM
Replies: 2
Views: 179
Posted By fairbank56
The agitator dogs have nothing to do with it. So,...

The agitator dogs have nothing to do with it. So, after washer stops filling, it does not go into agitation. Does the timer knob continue advancing even though the washer is not agitating? If not,...
Forum: Washer Repair 09-16-2014, 06:42 PM
Replies: 3
Views: 179
Posted By fairbank56
It connects to the motor thermal overload...

It connects to the motor thermal overload switch.

Eric

http://home.comcast.net/~fairbank56/WhirlpoolMotorThermalSwitch.jpg
Forum: Washer Repair 09-16-2014, 03:14 PM
Replies: 8
Views: 781
Posted By fairbank56
The shift actuator does not control spin...

The shift actuator does not control spin function. All it does is disengage the agitate gear when you are in spin so that the agitator does not go back and forth while basket is spinning.

Eric
Forum: Dryer Repair 09-16-2014, 05:52 AM
Replies: 3
Views: 143
Posted By fairbank56
No change, give it a try. I see some old valve...

No change, give it a try. I see some old valve assemblies with original coils on e bay.

Eric
Forum: Washer Repair 09-16-2014, 05:43 AM
Replies: 2
Views: 173
Posted By fairbank56
Take the front panel off the washer, disconnect...

Take the front panel off the washer, disconnect the hose from the air chamber on the left side of the tub and clean the gunk out of it. Also clean out any gunk in the air dome by using a turkey...
Forum: Washer Repair 09-16-2014, 05:35 AM
Replies: 4
Views: 218
Posted By fairbank56
You need to determine where the oil is leaking...

You need to determine where the oil is leaking from. It could be the input shaft seal, the cover gasket or the seals at the spin pinion gear that protrudes out the top of the gearcase. If it's a...
Forum: Washer Repair 09-16-2014, 05:25 AM
Replies: 2
Views: 121
Posted By fairbank56
Yes, rotating the transmission input shaft CCW...

Yes, rotating the transmission input shaft CCW should produce agitation and CW for spin. If not, time to replace the transmission.

Whirlpool 3360629 Neutral Drain Transmission -...
Forum: Dryer Repair 09-15-2014, 06:36 PM
Replies: 3
Views: 134
Posted By fairbank56
The dryer is supplied with 240vac between L1 and...

The dryer is supplied with 240vac between L1 and L2, and 120vac between L1 and neutral. The 120 volts runs the drive motor, 240 volts runs the heater coil and the timer motor. Sounds like you are...
Forum: Dryer Repair 09-15-2014, 04:12 PM
Replies: 3
Views: 134
Posted By fairbank56
Does the timer not advance in both timed dry and...

Does the timer not advance in both timed dry and auto dry cycles? Try resetting the AC panel breaker for the dryer. Sometimes one half of the breaker can trip without tripping the whole thing.

Eric
Forum: Washer Repair 09-15-2014, 02:13 PM
Replies: 3
Views: 90
Posted By fairbank56
Yes, that is correct. Eric

Yes, that is correct.

Eric
Forum: Washer Repair 09-15-2014, 12:47 PM
Replies: 4
Views: 199
Posted By fairbank56
Where is the water going when it drains out of...

Where is the water going when it drains out of the tub? Does the drive motor come on and pumping it out or is it just draining/siphoning on it's own? Make sure the drain hose to standpipe connection...
Showing results 1 to 25 of 500

 
Forum Jump


All times are GMT -7. The time now is 11:23 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17