Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 8 of 8
Search took 0.00 seconds.
Search: Posts Made By: clay cunliffe
Forum: Washer Repair 07-06-2009, 02:31 PM
Replies: 1
Views: 610
Posted By clay cunliffe
cant seem to balance a load

seems like every load no matter how we arrange clothes. washer bangs and walks across floor. what should I look for.
Forum: Dryer Repair 07-03-2009, 05:11 PM
Replies: 7
Views: 1,423
Posted By clay cunliffe
gene thanks for your help. your first suiggestion...

gene thanks for your help. your first suiggestion was right. I forgot to turn gas back on after replacing parts. you have been very helpful and thanks again for your time and helpful info.
Forum: Dryer Repair 07-03-2009, 10:04 AM
Replies: 7
Views: 1,423
Posted By clay cunliffe
gene sorry I made a mistake. the igniter ohm...

gene sorry I made a mistake. the igniter ohm check was 84.6. the flame sensor was 00.5 at the terminals and I did have continuety between terminals.
Forum: Dryer Repair 07-02-2009, 02:44 PM
Replies: 7
Views: 1,423
Posted By clay cunliffe
still no heat

replaced igniter and coil pack as you recommended. still have no flame. flame sensor ohm check was 84.6. igniter glows then clicks and shuts off then repeats. valves are not chattering any more since...
Forum: Dryer Repair 07-01-2009, 07:25 PM
Replies: 0
Views: 455
Posted By clay cunliffe
clothes wont dry

replaced igniter and valve coil 2 pack new style. flame sensor reads at 82 ohms. valves are not chattering anymore but flame will still not light. does cylinder have to be installed. what to do next....
Forum: Dryer Repair 06-30-2009, 12:24 PM
Replies: 7
Views: 1,423
Posted By clay cunliffe
dryer runs but will not dry clothes

ignitor glows but gas valve will not open. after glowing a short time I hear a click then ignitor will shut off and process repeats. could this be the flame sensor or is their other components that...
Forum: Dryer Repair 06-29-2009, 06:41 PM
Replies: 2
Views: 683
Posted By clay cunliffe
Please click one of the Quick Reply icons in the...

Please click one of the Quick Reply icons in the posts above to activate Quick Reply.
Forum: Dryer Repair 06-29-2009, 11:27 AM
Replies: 2
Views: 683
Posted By clay cunliffe
haeting problem

igniter glows but gas will not come out or light. could sensor be the problem or is there other parts that may cause gas valve not to open. I dont know if this may be an issue but i have been having...
Showing results 1 to 8 of 8

 
Forum Jump


All times are GMT -7. The time now is 09:02 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17