Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 500
Search took 0.13 seconds.
Search: Posts Made By: fairbank56
Forum: Dryer Repair Today, 11:48 AM
Replies: 5
Views: 106
Posted By fairbank56
Well, the only way the heat element can come on...

Well, the only way the heat element can come on without the motor running is if the element is grounded, the red wire going from the element to the motor connector is grounded or the motor heat...
Forum: Dryer Repair Today, 05:11 AM
Replies: 5
Views: 106
Posted By fairbank56
That is the oddest set of symptoms I've ever...

That is the oddest set of symptoms I've ever heard for a dryer. Are you sure the heat is not coming on when you just turn the timer on? The only thing the start button does is turn the motor on. The...
Forum: Washer Repair Today, 04:59 AM
Replies: 1
Views: 92
Posted By fairbank56
Remove the front panel of the machine. Rotate the...

Remove the front panel of the machine. Rotate the motor pulley and belt by hand. In one direction, the entire transmission should rotate (spin mode), in the other direction (agitation mode), the...
Forum: Washer Repair 07-03-2015, 03:01 PM
Replies: 4
Views: 139
Posted By fairbank56
The clutch is not used and is not driven during...

The clutch is not used and is not driven during agitation cycle. Pull the motor and set it on the floor still hooked up. Put your foot on it before starting as it will jump if it does run. See if it...
Forum: Washer Repair 07-03-2015, 09:21 AM
Replies: 4
Views: 139
Posted By fairbank56
Well, the clutch doesn't have anything to do with...

Well, the clutch doesn't have anything to do with the drain function so that's kind of strange. You may have a faulty timer. Just because it advances normally doesn't mean all the internal contacts...
Forum: Dryer Repair 07-01-2015, 04:48 PM
Replies: 1
Views: 95
Posted By fairbank56
Broken belt. GE WE12M29 Dryer Drum Drive Belt -...

Broken belt.

GE WE12M29 Dryer Drum Drive Belt - AppliancePartsPros.com (http://www.appliancepartspros.com/ge-dryer-drum-drive-we12m29-ap4324040.html)

Eric
Forum: Washer Repair 07-01-2015, 10:05 AM
Replies: 2
Views: 139
Posted By fairbank56
We would need the model number to be of any help....

We would need the model number to be of any help. Can't know if it even has electronic control with any diagnostic mode without it.

Eric
Forum: Washer Repair 07-01-2015, 10:02 AM
Replies: 2
Views: 270
Posted By fairbank56
That post was from 3 months ago, I would imagine...

That post was from 3 months ago, I would imagine that the problem has been resolved by now.

Eric
Forum: Washer Repair 07-01-2015, 09:57 AM
Replies: 6
Views: 236
Posted By fairbank56
The entire transmission should not rotate at all...

The entire transmission should not rotate at all when rotating the pulley in the CCW direction. Your brake is failing. The brake rotor is splined to the transmission's outer shaft and should prevent...
Forum: Dryer Repair 07-01-2015, 08:08 AM
Replies: 4
Views: 123
Posted By fairbank56
No, the only thing the moisture control does is...

No, the only thing the moisture control does is control the timer motor during auto dry cycle. You replaced both gas valve coils? Did you use genuine factory service replacement coils? These coils...
Forum: Dryer Repair 07-01-2015, 06:45 AM
Replies: 4
Views: 123
Posted By fairbank56
Terminal 2 of the 5 terminal thermostat is not...

Terminal 2 of the 5 terminal thermostat is not used on your dryer. Provide a photo of your existing thermostat. You may have faulty gas valve coils even though they test ok.

Eric
Forum: Washer Repair 07-01-2015, 06:01 AM
Replies: 3
Views: 180
Posted By fairbank56
The reset method is not for this type of washer....

The reset method is not for this type of washer. The lid switch on your schematic is at upper right under the control board. The switch is of the magnetic type and doesn't make any noise when...
Forum: Washer Repair 07-01-2015, 05:52 AM
Replies: 8
Views: 238
Posted By fairbank56
No, you don't have to remove the basket drive and...

No, you don't have to remove the basket drive and yes, use a mini hacksaw to cut it into the spin tube. Just be careful when your almost all the way through, don't cut into the spin tube itself. You...
Forum: Washer Repair 07-01-2015, 05:22 AM
Replies: 6
Views: 236
Posted By fairbank56
Just to be clear, it is the transmission input...

Just to be clear, it is the transmission input shaft that is rotating, not the entire transmission? When rotating the pulley CW the entire transmission should rotate which is what makes the basket...
Forum: Washer Repair 06-30-2015, 04:45 PM
Replies: 3
Views: 166
Posted By fairbank56
Well, it's impossible for the transmission to...

Well, it's impossible for the transmission to operate in agitate and spin modes at the same time. There is no "shifting" of gears in the transmission. The drive motor drives the transmission input...
Forum: Washer Repair 06-30-2015, 04:19 PM
Replies: 8
Views: 238
Posted By fairbank56
Yep, you need a new T bearing. To get the old one...

Yep, you need a new T bearing. To get the old one out, just cut it lengthwise with a hacksaw blade so it can loosen up. Tap the new one in with hammer and block of wood. Before you put the...
Forum: Washer Repair 06-30-2015, 06:27 AM
Replies: 8
Views: 238
Posted By fairbank56
The T bearing at the bottom of the basket drive...

The T bearing at the bottom of the basket drive may be worn out. Lets see a closeup photo of it with brake cam driver removed.

Eric
Forum: Washer Repair 06-30-2015, 06:21 AM
Replies: 6
Views: 236
Posted By fairbank56
What's going on with the motor and center pulley...

What's going on with the motor and center pulley during agitation? If you tilt the machine back and rotate the center pulley CCW by hand, this should cause the agitator to go back and forth. If you...
Forum: Washer Repair 06-29-2015, 03:07 PM
Replies: 3
Views: 166
Posted By fairbank56
What's the model number of the washer??? Eric

What's the model number of the washer???

Eric
Forum: Dryer Repair 06-29-2015, 10:16 AM
Replies: 4
Views: 158
Posted By fairbank56
Yes, that is the correct number. Eric

Yes, that is the correct number.

Eric
Forum: Dryer Repair 06-28-2015, 02:19 PM
Replies: 4
Views: 158
Posted By fairbank56
Looks to be a 1986 model. Eric

Looks to be a 1986 model.

Eric
Forum: Washer Repair 06-28-2015, 07:32 AM
Replies: 3
Views: 180
Posted By fairbank56
Check the lid switch. Eric

Check the lid switch.

Eric
Forum: Dryer Repair 06-28-2015, 04:54 AM
Replies: 1
Views: 108
Posted By fairbank56
During normal dryer operation, the burner cycles...

During normal dryer operation, the burner cycles on and off to maintain the proper heat level. In auto dry cycle, the timer only advances when the burner cycles off. If the burner is cycling on/off...
Forum: Washer Repair 06-27-2015, 06:41 PM
Replies: 1
Views: 111
Posted By fairbank56
The only place oil can come from is through a bad...

The only place oil can come from is through a bad seal at the transmission agitator shaft. Transmission is not serviceable so must be replaced.

GE WH38X10002 Transmission and Brake Assembly -...
Forum: Washer Repair 06-26-2015, 07:29 PM
Replies: 1
Views: 125
Posted By fairbank56
Does it sound like this?...

Does it sound like this? (https://www.youtube.com/watch?v=MrzRW9jvM0A&feature=youtu.be) If so, you need a new transmission.

Eric
Showing results 1 to 25 of 500

 
Forum Jump


All times are GMT -7. The time now is 07:56 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17