Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 500
Search took 0.22 seconds.
Search: Posts Made By: Appliance Ninja
Forum: Refrigerator & Freezer Repair 11-26-2013, 06:55 AM
Replies: 17
Views: 1,224
Posted By Appliance Ninja
It is hard to tell from the picture, is the top...

It is hard to tell from the picture, is the top of the coil frosted? What is the freezer temperature averaging?
Forum: Refrigerator & Freezer Repair 11-25-2013, 05:16 PM
Replies: 17
Views: 1,224
Posted By Appliance Ninja
The ice maker will not run until the thermostat...

The ice maker will not run until the thermostat in it closes at around 15* F. If the frost pattern was even on the coil, it is not likely a refrigerant issue. Was the frost blocking the coil? Is the...
Forum: Dishwasher Repair 11-25-2013, 03:33 PM
Replies: 11
Views: 2,085
Posted By Appliance Ninja
Great find, very well done!

Great find, very well done!
Forum: Oven Repair (including Ranges and Cooktops) 11-25-2013, 03:07 PM
Replies: 4
Views: 586
Posted By Appliance Ninja
I suspect you actually have an issue with the...

I suspect you actually have an issue with the oven igniter. Even though it glows, it has to draw ample current through the bimetal in the valve to open it and keep it open. I suspect that the igniter...
Forum: Refrigerator & Freezer Repair 11-25-2013, 03:02 PM
Replies: 17
Views: 1,224
Posted By Appliance Ninja
Thank you, I look forward to hearing from you!

Thank you, I look forward to hearing from you!
Forum: Refrigerator & Freezer Repair 11-25-2013, 02:08 PM
Replies: 3
Views: 480
Posted By Appliance Ninja
It is hard on the compressor for it to get that...

It is hard on the compressor for it to get that hot, so if it stalls again, replace that fan. Nice work tracking it down! Have a great week!
Forum: Refrigerator & Freezer Repair 11-25-2013, 12:29 PM
Replies: 3
Views: 480
Posted By Appliance Ninja
The condenser fan in the back of the cabinet,...

The condenser fan in the back of the cabinet, behind the lower panel, is not working. If you remove that panel from the compressor area, you will likely find it is not moving. If there is nothing...
Forum: Dryer Repair 11-25-2013, 08:36 AM
Replies: 9
Views: 848
Posted By Appliance Ninja
You are very welcome!

You are very welcome!
Forum: Washer Repair 11-25-2013, 08:35 AM
Replies: 17
Views: 1,253
Posted By Appliance Ninja
Glad you got it up and running, nice work!

Glad you got it up and running, nice work!
Forum: Dryer Repair 11-25-2013, 08:33 AM
Replies: 9
Views: 848
Posted By Appliance Ninja
Great, it sounds like you got it, nice job!

Great, it sounds like you got it, nice job!
Forum: Oven Repair (including Ranges and Cooktops) 11-25-2013, 08:32 AM
Replies: 10
Views: 1,663
Posted By Appliance Ninja
The igniters you have only spark to ignite the...

The igniters you have only spark to ignite the gas, they don't glow. If the spark board "sees" that one of the coils in the vale is bad, no matter which one, it will not allow the unit to attempt...
Forum: Refrigerator & Freezer Repair 11-25-2013, 08:27 AM
Replies: 5
Views: 643
Posted By Appliance Ninja
I would investigate the date code on the timers...

I would investigate the date code on the timers they have been installing before modifying the timing circuit, especially since this is a known issue and one that is covered under warranty, no matter...
Forum: Oven Repair (including Ranges and Cooktops) 11-24-2013, 08:20 PM
Replies: 9
Views: 800
Posted By Appliance Ninja
The sensor tests fine. You only have one burner,...

The sensor tests fine. You only have one burner, it is the same for bake and broil. The issue is not with the gas valve. There is some issue with the control, that is why you are getting the error...
Forum: Refrigerator & Freezer Repair 11-24-2013, 08:07 PM
Replies: 5
Views: 643
Posted By Appliance Ninja
There is actually a service pointer out on this...

There is actually a service pointer out on this problem. That document is attached. Have they looked at the date code on the parts they are replacing? This is a fairly new document and they may not...
Forum: Oven Repair (including Ranges and Cooktops) 11-24-2013, 05:48 PM
Replies: 1
Views: 418
Posted By Appliance Ninja
If you have a meter, you can test for 120 VAC at...

If you have a meter, you can test for 120 VAC at the igniter. Test from each wire to ground when the control is turned to a baking cycle. If you get no voltage, the oven control is faulty. If you...
Forum: Refrigerator & Freezer Repair 11-24-2013, 05:40 PM
Replies: 17
Views: 1,224
Posted By Appliance Ninja
Can you remove the panel from the back of the...

Can you remove the panel from the back of the freezer, inside the freezer section, please? Once removed, you will see an aluminum evaporator coil. Is the frost on that coil in one small area or...
Forum: Oven Repair (including Ranges and Cooktops) 11-24-2013, 05:37 PM
Replies: 9
Views: 391
Posted By Appliance Ninja
You are very welcome, let me know how it goes!...

You are very welcome, let me know how it goes! Have a great evening!
Forum: Dishwasher Repair 11-24-2013, 04:21 PM
Replies: 9
Views: 9,688
Posted By Appliance Ninja
Yes, your touch panel is bad and will need to be...

Yes, your touch panel is bad and will need to be replaced.
Forum: Dryer Repair 11-24-2013, 04:19 PM
Replies: 4
Views: 554
Posted By Appliance Ninja
Is the belt routed as the picture below shows?

Is the belt routed as the picture below shows?
Forum: Oven Repair (including Ranges and Cooktops) 11-24-2013, 03:25 PM
Replies: 9
Views: 391
Posted By Appliance Ninja
If that is the case, you likely only need thermal...

If that is the case, you likely only need thermal fuses (number 37) for each oven. Those are mounted on the back of each oven and the entire oven needs to be removed from the cabinet to access them....
Forum: Dryer Repair 11-24-2013, 03:20 PM
Replies: 4
Views: 554
Posted By Appliance Ninja
The belt in this model is different from all...

The belt in this model is different from all others in that the grooved side of the belt goes away from the drum, not against it. Is your belt around the drum with the grooves toward the drum?
Forum: Microwave Repair 11-24-2013, 02:48 PM
Replies: 1
Views: 572
Posted By Appliance Ninja
The fuse is number 5001 in the picture below,...

The fuse is number 5001 in the picture below, mounted on the filter board (number 5041), accessed after the outer cabinet wrapper is removed.
Forum: Dryer Repair 11-24-2013, 02:10 PM
Replies: 9
Views: 848
Posted By Appliance Ninja
You are very welcome, let me know how it goes!

You are very welcome, let me know how it goes!
Forum: Dryer Repair 11-24-2013, 01:56 PM
Replies: 9
Views: 848
Posted By Appliance Ninja
Excellent! With the dryer unplugged, remove the...

Excellent! With the dryer unplugged, remove the rear access panel and locate the heating element (number 17) and the thermal fuse (number 7) and remove the wires from both parts. Test the heating...
Forum: Dryer Repair 11-24-2013, 01:46 PM
Replies: 9
Views: 848
Posted By Appliance Ninja
The element being on when the machine is not...

The element being on when the machine is not running indicates that the heating element is likely shorted to ground and has opened the thermal fuse in response to the overheating. Do you have a meter...
Showing results 1 to 25 of 500

 
Forum Jump


All times are GMT -7. The time now is 07:32 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17