Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 420
Search took 0.57 seconds.
Search: Posts Made By: PNWDrew
Forum: Washer Repair 09-27-2017, 01:28 AM
Replies: 3
Views: 340
Posted By PNWDrew
Yep that's new design. If you've caught the leak...

Yep that's new design. If you've caught the leak before any significant damage to trans has occurred you might get away with just the seal. Usually when I see them its just the beginning. Its worth...
Forum: Refrigerator & Freezer Repair 09-27-2017, 01:17 AM
Replies: 12
Views: 1,113
Posted By PNWDrew
No worries, glad to hear your freezer at least is...

No worries, glad to hear your freezer at least is freezing. When you open it of course an inrush of warmer air enters, if it gives you realtime temps on display you might see a temp change as it...
Forum: Washer Repair 09-26-2017, 02:12 PM
Replies: 3
Views: 340
Posted By PNWDrew
I can't find your model #, double check it for...

I can't find your model #, double check it for me?

But if it's a modern GE unitized set the tub seal comes out the bottom I believe, on the trans shaft.

You still need the tub free from the shaft...
Forum: Washer Repair 09-25-2017, 07:48 PM
Replies: 3
Views: 304
Posted By PNWDrew
Good job. Many times even getting the thin one in...

Good job. Many times even getting the thin one in is a challenge, depends on how fresh the brakes are too.
Forum: Washer Repair 09-25-2017, 07:36 PM
Replies: 3
Views: 304
Posted By PNWDrew
1st guess - You may have to adjust that thrust...

1st guess - You may have to adjust that thrust bearing on the bottom. I assume you mean you installed the thrust bearing kit, with pulley, cam, 2 washers, bearing etc...?

If you pop the dustcap off...
Forum: Dryer Repair 09-24-2017, 10:18 PM
Replies: 2
Views: 404
Posted By PNWDrew
I assume you mean you can see debris where the...

I assume you mean you can see debris where the filter slides in?

Good news the inner plastic grille comes off with 2 screws (maybe 3) and you may be able to reach the area with a vacuum attachment...
Forum: Dryer Repair 09-24-2017, 09:57 PM
Replies: 1
Views: 390
Posted By PNWDrew
I'd have to test incoming 220V supply but I'd...

I'd have to test incoming 220V supply but I'd suspect your relay to be the issue. If you haven't flipped the breaker a few times yet do it.

Can't be certain without testing but this is common on...
Forum: Refrigerator & Freezer Repair 09-24-2017, 09:30 PM
Replies: 1
Views: 347
Posted By PNWDrew
Yes I believe it does, plug it into the 2 holes...

Yes I believe it does, plug it into the 2 holes it fits into, T and H I believe.
Forum: Refrigerator & Freezer Repair 09-24-2017, 09:14 PM
Replies: 1
Views: 2,761
Posted By PNWDrew
Parts for Maytag MTB2156DEW: Wiring Information...

Parts for Maytag MTB2156DEW: Wiring Information Parts - AppliancePartsPros.com (http://www.appliancepartspros.com/10-wiring-information-parts-for-maytag-mtb2156dew.html)

There's your diagram. You...
Forum: Refrigerator & Freezer Repair 09-23-2017, 05:55 PM
Replies: 8
Views: 532
Posted By PNWDrew
Good! Glad to be of assistance.

Good! Glad to be of assistance.
Forum: Refrigerator & Freezer Repair 09-17-2017, 04:33 PM
Replies: 5
Views: 410
Posted By PNWDrew
Your welcome. I hope I'm right!

Your welcome. I hope I'm right!
Forum: Refrigerator & Freezer Repair 09-17-2017, 03:51 PM
Replies: 3
Views: 310
Posted By PNWDrew
Ah... Each defrost will drop a cup or more of...

Ah... Each defrost will drop a cup or more of water in there. It should dry by evaporation. If it isn't drying it can get nasty. If there isn't much airflow due to clearances around the unit that can...
Forum: Washer Repair 09-17-2017, 03:22 PM
Replies: 3
Views: 285
Posted By PNWDrew
GE WH46X10270 Weld Asm Rod Support -...

GE WH46X10270 Weld Asm Rod Support - AppliancePartsPros.com (http://www.appliancepartspros.com/ge-weld-asm-rod-wh46x10270-ap5608273.html)

On your unit that is the part you are referring to. The...
Forum: Washer Repair 09-17-2017, 02:51 PM
Replies: 1
Views: 255
Posted By PNWDrew
It is probably your timer itself as opposed to...

It is probably your timer itself as opposed to the knob but to pull the knob off you need to retract a pin that you access on back side of timer. In normal function you can stick a small screwdriver...
Forum: Washer Repair 09-17-2017, 02:38 PM
Replies: 1
Views: 271
Posted By PNWDrew
It's part of the spin basket, under the tub ring....

It's part of the spin basket, under the tub ring. If you lift the whole deck the tub ring unclips from the tub and exposes the top of the basket, that plastic top edge is it. Not a separate part...
Forum: Refrigerator & Freezer Repair 09-17-2017, 02:33 PM
Replies: 8
Views: 532
Posted By PNWDrew
Yes, that's a quick test that is usually...

Yes, that's a quick test that is usually reasonably reliable. Same thing I'd do. If ADC is bad usually you'd have defrost issues in 3-5 days.
Forum: Refrigerator & Freezer Repair 09-17-2017, 02:31 PM
Replies: 3
Views: 310
Posted By PNWDrew
That really isn't an option on that unit. It's...

That really isn't an option on that unit. It's possible but not something that a DIYer really would tackle.

Why do you want it cleaned?
Forum: Refrigerator & Freezer Repair 09-17-2017, 02:25 PM
Replies: 5
Views: 410
Posted By PNWDrew
The coil is part of the thermostat that tells the...

The coil is part of the thermostat that tells the damper when to open/close. It is a sealed tube, so pressure changes in it correlate with temp.

If you run the unit without a damper it will become...
Forum: Refrigerator & Freezer Repair 09-17-2017, 01:27 AM
Replies: 8
Views: 532
Posted By PNWDrew
If it has developed a full frost pattern on the...

If it has developed a full frost pattern on the evap the sealed system is probably fine. That's the big money repair that is not DIY. The defrost thermostat is cheap. The ADC is more but less than a...
Forum: Refrigerator & Freezer Repair 09-15-2017, 11:01 PM
Replies: 1
Views: 311
Posted By PNWDrew
Is freezer is cold, 10deg F or around there? Ice...

Is freezer is cold, 10deg F or around there? Ice cream is a nice way to check for temps below 15 degrees, above that it'll begin to soften.
Some quick checks:
1) Door switch in top section? Push it...
Forum: Refrigerator & Freezer Repair 09-15-2017, 10:52 PM
Replies: 1
Views: 326
Posted By PNWDrew
That code means the control lost the fan speed...

That code means the control lost the fan speed feedback signal. It is a variable speed fan and the control drives and monitors it. If you are certain the previous owner replaced the evap fan motor...
Forum: Refrigerator & Freezer Repair 09-15-2017, 10:38 PM
Replies: 2
Views: 310
Posted By PNWDrew
That adaptive defrost control is a likely part,...

That adaptive defrost control is a likely part, but the defrost thermostat is also a possibility. The ADC can fail in several ways. You'd need to do a deeper diagnosis to narrow it down. If you have...
Forum: Refrigerator & Freezer Repair 09-15-2017, 10:30 PM
Replies: 1
Views: 315
Posted By PNWDrew
Sounds like a shorted defrost heater or...

Sounds like a shorted defrost heater or thermostat,or possibly the wiring to them. I think that's an 8 hr timer, so every 8 hrs it goes into defrost, if there is a short somewhere it'll trip the...
Forum: Refrigerator & Freezer Repair 09-15-2017, 10:21 PM
Replies: 5
Views: 410
Posted By PNWDrew
There are several possibilities here. 1st...

There are several possibilities here. 1st question is if temps in fresh food and freezer section are normal?
1) Check your door gaskets; top and bottom doors, air leaks could cause it.
2) Look at...
Forum: Refrigerator & Freezer Repair 09-15-2017, 10:05 PM
Replies: 8
Views: 532
Posted By PNWDrew
There are no tests you can really do with the...

There are no tests you can really do with the board out unless you have a load jig to simulate loads. That is your adaptive defrost control (ADC), it could be sticking in defrost or in the steps of...
Showing results 1 to 25 of 420

 
Forum Jump


All times are GMT -7. The time now is 10:45 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17