Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 500
Search took 0.09 seconds.
Search: Posts Made By: Joe / APP Team
Forum: Washer Repair 12-07-2017, 07:23 AM
Replies: 18
Views: 42,478
Posted By Joe / APP Team
BRT123, Happy Mom didn't post a response or an...

BRT123, Happy Mom didn't post a response or an update. But , Like her and most of the people on this thread, you most likely have a problem with the user interface tabs, so you'll need to remove...
Forum: Dishwasher Repair 12-04-2017, 09:53 AM
Replies: 5
Views: 2,298
Posted By Joe / APP Team
Beowing, Thanks for posting your experience with...

Beowing, Thanks for posting your experience with your Bosch dishwasher repair. We're glad to hear your machine is up and running properly and cleaning the dishes. Great Job !!! Thanks Again,
Forum: Oven Repair (including Ranges and Cooktops) 10-30-2017, 12:51 PM
Replies: 27
Views: 38,907
Posted By Joe / APP Team
decorblues, You're almost correct, The...

decorblues, You're almost correct, The ERC/Control monitors certain circuits
constantly, as long as power is supplied, the control monitors the key pad assembly, oven sensor and the door lock switch...
Forum: Dishwasher Repair 10-25-2017, 10:12 AM
Replies: 17
Views: 25,880
Posted By Joe / APP Team
WOW !!! Sounds like the problem was around for a...

WOW !!!
Sounds like the problem was around for a while, before the UL error code was displayed. When it comes to damaged tubs and drive system components, it can get expensive for the parts. With...
Forum: Refrigerator & Freezer Repair 09-22-2017, 08:36 AM
Replies: 18
Views: 4,243
Posted By Joe / APP Team
Mike, OK, make sure you get the splices tight and...

Mike, OK, make sure you get the splices tight and sealed so moisture or condensation can't get in the harness and create problems. Keep in touch.
Forum: Oven Repair (including Ranges and Cooktops) 09-18-2017, 12:12 PM
Replies: 79
Views: 75,807
Posted By Joe / APP Team
GREAT !!! We're glad you worked it out, and...

GREAT !!! We're glad you worked it out, and you're machine is up and running. Great Job. We're here if you need us. Thanks Again,
Forum: Oven Repair (including Ranges and Cooktops) 09-14-2017, 10:20 AM
Replies: 79
Views: 75,807
Posted By Joe / APP Team
Drazlou, Correct, it really doesn't matter which...

Drazlou, Correct, it really doesn't matter which P1 terminal you use for the jumper wire. Always found it easier to install the jumper wire first, right out of the bag, then transfer and attach the...
Forum: Refrigerator & Freezer Repair 08-22-2017, 08:00 AM
Replies: 5
Views: 2,181
Posted By Joe / APP Team
Qurph, Basically, you isolate the location of the...

Qurph, Basically, you isolate the location of the noise and listen for certain sounds. The compressor usually makes a slight humming noise, and is located at the bottom/back of the refrigerator....
Forum: Refrigerator & Freezer Repair 08-21-2017, 08:17 AM
Replies: 5
Views: 2,181
Posted By Joe / APP Team
Qurph, Your post indicates that all is working...

Qurph, Your post indicates that all is working well.If any pad is pressed within 15 seconds it will generate the following sequence:
1st press - Manual operation Compressor and Fans (FF)...
Forum: Oven Repair (including Ranges and Cooktops) 08-10-2017, 07:11 AM
Replies: 79
Views: 75,807
Posted By Joe / APP Team
Drazlou, GREAT !!! Glad you didn't damage...

Drazlou,

GREAT !!!
Glad you didn't damage anything. When you mis wire that switch, quite often
it'll short out the internal contacts and it will need to be replaced. Thanks Again, Great job.
Forum: Oven Repair (including Ranges and Cooktops) 08-09-2017, 01:19 PM
Replies: 79
Views: 75,807
Posted By Joe / APP Team
Dazlou, You're Very Welcome !!! Good Luck,

Dazlou, You're Very Welcome !!!

Good Luck,
Forum: Oven Repair (including Ranges and Cooktops) 08-09-2017, 12:27 PM
Replies: 79
Views: 75,807
Posted By Joe / APP Team
Drazlou, OK, Sounds like a deal to me. Just...

Drazlou,

OK, Sounds like a deal to me.
Just remember, the wire colors may be different, but the terminals and connections will be the same at the element and the new switch(per the previous wiring...
Forum: Oven Repair (including Ranges and Cooktops) 08-09-2017, 07:55 AM
Replies: 79
Views: 75,807
Posted By Joe / APP Team
Drazlou, No, splitting the double staked red...

Drazlou, No, splitting the double staked red wires on you model isn't necessary. The single red wire to terminal 2 is sufficient to operate the "common " L2 power out to the element. We wouldn't...
Forum: Oven Repair (including Ranges and Cooktops) 08-08-2017, 01:40 PM
Replies: 79
Views: 75,807
Posted By Joe / APP Team
Dazlou, If you're sure the new switch is wired...

Dazlou, If you're sure the new switch is wired correctly, and there's no visible damage to the element rings/ribbons, Then the AP4008679 is damaged internally and will need to be replaced, again.
Forum: Oven Repair (including Ranges and Cooktops) 08-08-2017, 01:31 PM
Replies: 79
Views: 75,807
Posted By Joe / APP Team
Drazlou, the element isn't in question. The...

Drazlou, the element isn't in question. The question is, the wire colors, to the element rings/ribbons. The wiring diagram indicates a tan and orange wires to the individual element terminals, you...
Forum: Oven Repair (including Ranges and Cooktops) 08-08-2017, 12:54 PM
Replies: 79
Views: 75,807
Posted By Joe / APP Team
Drazlou, The wire colors are a little different...

Drazlou, The wire colors are a little different on the wiring diagram, so you may need to trace the element wires to the specific element ring, so give this a try :
First install the jumper wire...
Forum: Oven Repair (including Ranges and Cooktops) 08-08-2017, 10:34 AM
Replies: 79
Views: 75,807
Posted By Joe / APP Team
Drazlou, We're going to need the model number of...

Drazlou, We're going to need the model number of your product, so we can trace the wires and circuits to get the rear burner element to work properly.
In the mean time, you'll want to use a multi...
Forum: Oven Repair (including Ranges and Cooktops) 08-02-2017, 12:47 PM
Replies: 5
Views: 1,338
Posted By Joe / APP Team
Elizabeth, That's not the usual progression or...

Elizabeth, That's not the usual progression or symptoms of a control panel/keypad failure. After a few years of operation and cleaning procedures, the keypad circuits can fail and you will see the...
Forum: Refrigerator & Freezer Repair 07-28-2017, 08:01 AM
Replies: 20
Views: 4,954
Posted By Joe / APP Team
Mashtun, You're Very Welcome !!! You need to...

Mashtun, You're Very Welcome !!!
You need to remember, this forum is a group effort, several of the responses are a compilation of personal and technical experiences that make the repair of a...
Forum: Washer Repair 07-19-2017, 09:37 AM
Replies: 34
Views: 27,310
Posted By Joe / APP Team
Mike, You're doing fine, for a novice....

Mike, You're doing fine, for a novice. Presumably, you tested the resistance at the main control board for the CN8 connector. Now you need to go to the motor, disconnect the harness from the motor...
Forum: Washer Repair 07-18-2017, 07:31 AM
Replies: 34
Views: 27,310
Posted By Joe / APP Team
Mike, Everything "looks" good and...

Mike, Everything "looks" good and proper. Reset your meter to the 20K ohms resistance setting and recheck the resistance on the CN8 connector. The orange wire to blue and pink wires should show...
Forum: Washer Repair 07-17-2017, 10:51 AM
Replies: 34
Views: 27,310
Posted By Joe / APP Team
Mike, Yes, there are various control boards and...

Mike, Yes, there are various control boards and control board kits depending on model and serial number. Get the model and serial number off the tagnon the machine and we can research the proper part...
Forum: Washer Repair 07-17-2017, 10:13 AM
Replies: 34
Views: 27,310
Posted By Joe / APP Team
Mike, It's best to check the motor resistances at...

Mike, It's best to check the motor resistances at the CN9 and CN 8 connectors on the main control board, that way you're testing the complete circuit of each motor winding and the wiring. Unplug the...
Forum: Dryer Repair 07-12-2017, 07:19 AM
Replies: 8
Views: 4,235
Posted By Joe / APP Team
Calor006, You're Very Welcome !!! Glad we could...

Calor006,
You're Very Welcome !!! Glad we could help you out. Keep the Repair Forum in mind, when you have a problem with your appliances. Thanks Again,
Forum: Refrigerator & Freezer Repair 07-11-2017, 02:31 PM
Replies: 18
Views: 4,243
Posted By Joe / APP Team
Jeep85, Unfortunately we're in the EST zone and...

Jeep85, Unfortunately we're in the EST zone and will be away from the office by the time you get home. reply to this post, include an e mail address or area code and phone number, so we can try and...
Showing results 1 to 25 of 500

 
Forum Jump


All times are GMT -7. The time now is 12:19 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17