Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 500
Search took 0.11 seconds.
Search: Posts Made By: richappy
Forum: Refrigerator & Freezer Repair Yesterday, 03:48 AM
Replies: 1
Views: 112
Posted By richappy
Turn the cold control to the coldest setting. If...

Turn the cold control to the coldest setting. If it still short cycles, you have a bad compressor.
Forum: Refrigerator & Freezer Repair 04-18-2014, 03:51 AM
Replies: 2
Views: 156
Posted By richappy
The new part just plugs in to the 3 compressor...

The new part just plugs in to the 3 compressor pins, the two male spade terminals get the fridg power wires and the other two, the run capacitor. Polarity insensitive.
Forum: Refrigerator & Freezer Repair 04-14-2014, 03:09 AM
Replies: 1
Views: 86
Posted By richappy
I would suspect a bad control board AP3957581

I would suspect a bad control board AP3957581
Forum: Refrigerator & Freezer Repair 04-11-2014, 02:16 AM
Replies: 1
Views: 116
Posted By richappy
Most probably the motherboard is bad, it controls...

Most probably the motherboard is bad, it controls the display board
Forum: Refrigerator & Freezer Repair 04-10-2014, 04:05 AM
Replies: 1
Views: 106
Posted By richappy
Wiring rarely fail, so I would suspect either a...

Wiring rarely fail, so I would suspect either a bad compressor or inverter.
you have a bad compressor If a new inverter fails to start the compressor
Forum: Refrigerator & Freezer Repair 04-10-2014, 03:27 AM
Replies: 1
Views: 152
Posted By richappy
I would replace the motherboard, the display...

I would replace the motherboard, the display boards rarely fail, but the display gets power and signals from the motherboard
Forum: Refrigerator & Freezer Repair 04-09-2014, 01:26 AM
Replies: 2
Views: 183
Posted By richappy
The 3 n 1 draws very high current, it may have...

The 3 n 1 draws very high current, it may have blown out something like the defrost timer , or cold control. Generally, these devices are not recommended for any small, domestic fridg compressor.
Forum: Refrigerator & Freezer Repair 04-09-2014, 01:21 AM
Replies: 2
Views: 130
Posted By richappy
You need to replace both the evaporator motor and...

You need to replace both the evaporator motor and the motherboard.
Forum: Refrigerator & Freezer Repair 04-08-2014, 02:59 AM
Replies: 2
Views: 151
Posted By richappy
Seems like a bad control board AP5318915

Seems like a bad control board AP5318915
Forum: Refrigerator & Freezer Repair 04-08-2014, 02:53 AM
Replies: 1
Views: 109
Posted By richappy
Never use a 3 n 1 hard start, they burn out...

Never use a 3 n 1 hard start, they burn out compressors!
Check the cold control and defrost timer, maybe it's in defrost.
Forum: Refrigerator & Freezer Repair 04-06-2014, 02:46 AM
Replies: 4
Views: 2,728
Posted By richappy
Normally you would purge the system, cut the cap...

Normally you would purge the system, cut the cap tube, and blow the clog out with gas, but if a modern, high efficiency compressor, the compressor is damaged from very high internal pressure.
Forum: Refrigerator & Freezer Repair 04-05-2014, 04:33 AM
Replies: 1
Views: 172
Posted By richappy
Pull the 3 pin power connector from the...

Pull the 3 pin power connector from the motherboard. Place a wire between the connector pis the mate with the motherboard pins labeld line and comp.
Plug fridg in, if compressor fails to run, you...
Forum: Refrigerator & Freezer Repair 04-04-2014, 03:16 AM
Replies: 4
Views: 197
Posted By richappy
Most probable problem is the defrost thermostat,...

Most probable problem is the defrost thermostat, assuming the evaporator coils freeze up evenly.
Forum: Refrigerator & Freezer Repair 04-03-2014, 04:37 AM
Replies: 1
Views: 160
Posted By richappy
Post the freezer temperarure

Post the freezer temperarure
Forum: Refrigerator & Freezer Repair 04-03-2014, 04:34 AM
Replies: 4
Views: 197
Posted By richappy
Post the freezer temperature.

Post the freezer temperature.
Forum: Refrigerator & Freezer Repair 04-03-2014, 04:31 AM
Replies: 1
Views: 115
Posted By richappy
Probably a bad motherboard AP4481481

Probably a bad motherboard AP4481481
Forum: Refrigerator & Freezer Repair 04-03-2014, 04:01 AM
Replies: 8
Views: 165
Posted By richappy
Buy a packaged device with klaxon and overload...

Buy a packaged device with klaxon and overload for your fridg, that will be a safe device to wire up!!
Forum: Refrigerator & Freezer Repair 04-02-2014, 03:03 PM
Replies: 8
Views: 165
Posted By richappy
If you don't have a meter, you run the risk of...

If you don't have a meter, you run the risk of burning out your compressor if you wire it wrong.
Forum: Refrigerator & Freezer Repair 04-02-2014, 03:00 PM
Replies: 8
Views: 165
Posted By richappy
If you have a ohms meter, I can help.

If you have a ohms meter, I can help.
Forum: Refrigerator & Freezer Repair 04-02-2014, 09:05 AM
Replies: 7
Views: 192
Posted By richappy
I know nothing about this .

I know nothing about this .
Forum: Refrigerator & Freezer Repair 04-02-2014, 08:21 AM
Replies: 7
Views: 192
Posted By richappy
Your board must put a square wave out to run the...

Your board must put a square wave out to run the motor, you have a bad board. Make sure the motor is new also.
Forum: Refrigerator & Freezer Repair 04-02-2014, 03:28 AM
Replies: 8
Views: 165
Posted By richappy
I assume this is an R12 refrigerant system

I assume this is an R12 refrigerant system
Forum: Refrigerator & Freezer Repair 04-02-2014, 03:21 AM
Replies: 8
Views: 165
Posted By richappy
The run wire bottom right

The run wire bottom right
Forum: Refrigerator & Freezer Repair 04-02-2014, 03:20 AM
Replies: 8
Views: 165
Posted By richappy
If not but a packaged device with lables r s and ...

If not but a packaged device with lables r s and c, the top pin gets the c wire the run wire, bottom left and the s wire, bottom left
Forum: Refrigerator & Freezer Repair 04-02-2014, 03:17 AM
Replies: 8
Views: 165
Posted By richappy
Is the ptc device the MCBR100 shown on this site?

Is the ptc device the MCBR100 shown on this site?
Showing results 1 to 25 of 500

 
Forum Jump


All times are GMT -7. The time now is 11:28 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17