Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Search Forums » Search Results

Showing results 1 to 25 of 500
Search took 0.12 seconds.
Search: Posts Made By: sidfink43
Forum: Washer Repair 04-12-2014, 06:33 PM
Replies: 1
Views: 188
Posted By sidfink43
The fact that water will drain out of the hose...

The fact that water will drain out of the hose when it is lower says nothing is blocking things. The problem may be with the pump, if you have some tech skills you can take it out and attach jumper...
Forum: Washer Repair 04-12-2014, 06:29 PM
Replies: 1
Views: 170
Posted By sidfink43
The manual does not list a method for checking...

The manual does not list a method for checking the MCU, and about the only thing you can do is replace it and see if that fixes things. YOu can return the part if you buy it from this site and it...
Forum: Washer Repair 04-12-2014, 06:23 PM
Replies: 5
Views: 237
Posted By sidfink43
Okay good! I am going to link you to the service...

Okay good!

I am going to link you to the service manual

http://www.emaservicetips.com/pdfs/493_LaundryCenterwithTumbleActionWasher.pdf

and it will show you where the tech sheet is, along with how...
Forum: Washer Repair 04-11-2014, 05:16 AM
Replies: 5
Views: 237
Posted By sidfink43
Gosh if it is not on the inside of the dryer door...

Gosh if it is not on the inside of the dryer door I don't know where it might be.
Forum: Washer Repair 04-10-2014, 05:39 PM
Replies: 5
Views: 237
Posted By sidfink43
This sounds like it may be the control unit, but...

This sounds like it may be the control unit, but you really need the model number so we can look further and if you have to order parts so you can order the right one.
Forum: Washer Repair 04-10-2014, 05:37 PM
Replies: 1
Views: 148
Posted By sidfink43
Okay this is somewhat of a mystery since first of...

Okay this is somewhat of a mystery since first of all it works through the wash cycle which suggests that there is nothing mechanically wrong with the machine, and second, all that has to happen is...
Forum: Washer Repair 04-09-2014, 04:34 PM
Replies: 1
Views: 100
Posted By sidfink43
You have posted on the washer page. If you will...

You have posted on the washer page. If you will post on the refrigerator page someone should be able to help you.

If you want to start troubleshooting check the fan and the components that control...
Forum: Washer Repair 04-09-2014, 04:32 PM
Replies: 1
Views: 101
Posted By sidfink43
Look under the top or inside the lower service...

Look under the top or inside the lower service panel and you should find tech notes that will show you how to put it into a diagnostic mode and generate error codes.

You can then use the notes to...
Forum: Washer Repair 04-09-2014, 04:27 PM
Replies: 1
Views: 194
Posted By sidfink43
If you have not already done so, take off the...

If you have not already done so, take off the front panel and see if there is a flashing green light on the motor assembly. If so that is an error code and here is how to interpret them.

HydroWave...
Forum: Washer Repair 04-03-2014, 05:42 PM
Replies: 1
Views: 168
Posted By sidfink43
What I would do is switch the hot and cold...

What I would do is switch the hot and cold connections on the valve assembly. Then see if the reverse is true, that you have good cold water flow but weak hot water flow. If that is the case it...
Forum: Washer Repair 04-02-2014, 07:17 AM
Replies: 1
Views: 186
Posted By sidfink43
Well sorry for your difficulties, thise Duets do...

Well sorry for your difficulties, thise Duets do a great job washing but they are very difficult to diagnose. And I am not sure what your reading of 880 is on your meter.

If you operate the machine...
Forum: Washer Repair 04-02-2014, 07:13 AM
Replies: 1
Views: 191
Posted By sidfink43
This would suggest there is a problem with either...

This would suggest there is a problem with either the door lock assembly, the wiring to it or the control unit. See if there isn't tech notes inside the lower service panel or under the top which...
Forum: Washer Repair 03-30-2014, 07:11 PM
Replies: 6
Views: 262
Posted By sidfink43
Replacing the timer should have fixed it, since...

Replacing the timer should have fixed it, since it appears to work during the extra rinse cycle and that means there is no mechanical difficulties.

It could be that clutch is bad, but that wouldn't...
Forum: Washer Repair 03-30-2014, 07:05 PM
Replies: 1
Views: 142
Posted By sidfink43
Difficult to say, it could be the control unit...

Difficult to say, it could be the control unit but since there are no error codes I think you may have a problem with the mechanism and I would try replacing it.
Forum: Washer Repair 03-30-2014, 07:03 PM
Replies: 2
Views: 181
Posted By sidfink43
Check the lid switch, it is likely the cause of...

Check the lid switch, it is likely the cause of the problem and can be easily and inexpensively replaced.
Forum: Washer Repair 03-29-2014, 05:49 AM
Replies: 1
Views: 224
Posted By sidfink43
Even with a video it is hard to diagnose noises...

Even with a video it is hard to diagnose noises without being there. The likely cause, as I am sure you have already realized, is something to do with the new clutch or with the rreinstallation of...
Forum: Washer Repair 03-29-2014, 05:45 AM
Replies: 1
Views: 105
Posted By sidfink43
Unless the oil is from some oily clothes that you...

Unless the oil is from some oily clothes that you inadvertently put into the machine the stains are generally signs of the internal workings of the machine are failing. In this case a new washer is...
Forum: Washer Repair 03-27-2014, 05:10 AM
Replies: 14
Views: 396
Posted By sidfink43
This model series can have a one, two or three...

This model series can have a one, two or three speed motor. I am guessing that you do have the three speed motor. Based on your description I did not think the spin selection speed was an issue...
Forum: Washer Repair 03-26-2014, 03:49 PM
Replies: 14
Views: 396
Posted By sidfink43
A feeler guage that is used for gapping spark...

A feeler guage that is used for gapping spark plugs should work, as for the spin speed, well you will know it when you see it, don't worry about the specs.
Forum: Washer Repair 03-26-2014, 01:17 PM
Replies: 14
Views: 396
Posted By sidfink43
I don't think a video will help. But I think you...

I don't think a video will help.

But I think you have narrowed it down to the brakes are not releasing or the transmission is broken. Since it will spin but slowly it is indeed possible the brakes...
Forum: Washer Repair 03-26-2014, 11:36 AM
Replies: 14
Views: 396
Posted By sidfink43
Okay, if the belt is new then it may not be put...

Okay, if the belt is new then it may not be put on right, the tension/idler parts may not be right or something else involving the installation. You might want to take it off and re-assemble...
Forum: Washer Repair 03-26-2014, 09:18 AM
Replies: 14
Views: 396
Posted By sidfink43
Well darn, was hoping it was a blockage. There...

Well darn, was hoping it was a blockage.

There is no clutch on this model, but if the problem is not blockage there are a lot of possibilities. It could be that the belt is stretched, it could be...
Forum: Washer Repair 03-25-2014, 06:33 PM
Replies: 14
Views: 396
Posted By sidfink43
Take off the front panel and check and clean out...

Take off the front panel and check and clean out the drain hose coming from the tub to the pump and then the hose leaving the pump. It could be something is caught in there.

Then operate the...
Forum: Washer Repair 03-24-2014, 09:38 AM
Replies: 3
Views: 142
Posted By sidfink43
That's not a problem but I would still open up...

That's not a problem but I would still open up the top of the console and make sure the uninsulated part of the wiring is not touching anything. Again, you may also be able to jam it back so you can...
Forum: Washer Repair 03-22-2014, 06:56 PM
Replies: 3
Views: 142
Posted By sidfink43
Okay what has happened here is that the timer is...

Okay what has happened here is that the timer is encased in a plastic case with tabs that hold it to the panel. These tabs are very weak (thanks GE) and break all the time. When you pushed the knob...
Showing results 1 to 25 of 500

 
Forum Jump


All times are GMT -7. The time now is 03:59 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17