Rank: Member
Groups: Registered
Joined: 5/11/2010(UTC)
Posts: 6
|
Model Number: tfx20jrxfww Brand: GE Age: More than 10 years Ice maker dispenser does not dispense ice cubes. That petty much say it all. I did have this problem 5 years ago and it was the circuit board in the freezer door. I have tried a new circuit board and it did not fix the problem the part could defective. So am in the right place to fix this problem. I think the part I need is AP2071638. Sorry this is a duplicate. Bill
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Bill,
Does it dispense crushed ice?
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/11/2010(UTC)
Posts: 6
|
Yes it does chrushed ice in the cube mode & crushed mode it also the water works.
Bill
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Bill, Remove the ice bin, the ice maker, protector shelf and the motor cover (#360 & #361 on the diagram). Check for 120 VAC to the solenoid (#378) while the ice dispenser is in "cube" mode, the ice dispenser lever depressed and the door light switch depressed. Post the results. Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/11/2010(UTC)
Posts: 6
|
I just ordered the solenoid and that fixed the ice dispenser.
Thanks Bill
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
You are welcome Bill. I'm glad you were able to fix it.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/11/2010(UTC)
Posts: 6
|
I also found out I had a defrost issue i replaced both timer and elements i hope that fixes that issue.
Bill
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/29/2010(UTC)
Posts: 1
|
Originally Posted by: Gene  Bill, Remove the ice bin, the ice maker, protector shelf and the motor cover (#360 & #361 on the diagram). Check for 120 VAC to the solenoid (#378) while the ice dispenser is in "cube" mode, the ice dispenser lever depressed and the door light switch depressed. Post the results. Gene. I am the owner of a GSH22JSTA which had a failed defrost element replaced (with the newer double-tube). My icemaker has always dispensed crushed ice, but no cubes. For a short time after the repair, the solenoid worked and cubes were dispensed. Now the solenoid appears to be frozen up again. Could this be a defrost timer issue, or is there an improved solenoid that might not be so prone to freezing up? I do note some frost and ice around the icemaker back chassis where the solenoid and auger motor are mounted. Thanks -Stan
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
