Refrigerator & Freezer Repair

mjackobs · #1 (**permalink**) 05-30-2008, 02:06 PM

Hi --My ge frige was building up major frost, the board and the heater assembly were out so I ordered them from you guys (order#374188). the new board is slightly different from the one I pulled. It has a few more plug ins and a few more transistors. All of the plugs I need are there, but does it need to be the exact same board? I received part #wr55x10552. thanks for your help. Mark

abadfish66 · #2 (**permalink**) 05-30-2008, 02:54 PM

That is the correct board, they manufactured the new boards to fit in a number of refrigerators, so it will have more things on it. Make sure you look at the directions with the board, there is a wire that must be cut on some models, compare your wiring to the picture on instructions.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ge Main Board Installation	djd2010	Refrigerator & Freezer Repair	9	09-08-2012 11:58 AM
main control board	mark guardascione	Refrigerator & Freezer Repair	3	09-08-2011 02:52 AM
Main Board problem	Bilbo_Baggins	Refrigerator & Freezer Repair	2	04-28-2010 10:02 PM
main control board	mark guardascione	Refrigerator & Freezer Repair	1	04-28-2010 09:58 PM
Main Board w/ Inverter Harness	joedadog	Refrigerator & Freezer Repair	0	01-31-2009 06:27 AM

new main board for '02 ge S x S

Refrigerator & Freezer Repair

Hi --My ge frige was building up major frost, the board and the heater assembly were out so I ordered