Refrigerator & Freezer Repair

mq43 · #1 (**permalink**) 12-22-2009, 09:37 AM

I've read other posts and responses on removing the front panel by prying it off. I'm using a 1 1/2 paint scraper to get behind the panel but it won't pry away. Created a small crack trying -

. Any tips would be appreciated on how to get this off without further damage. Thanks

Gene · #2 (**permalink**) 12-22-2009, 01:14 PM

You can not remove the front panel because you tried to use a putty knife. Instead you have to use a small screwdriver. Insert a screwdriver blade into the two slots on the bottom side of the cover. By gently turning the blade, the cover will snap free at the bottom and can be slid upward to be removed.

Here are the breakdown diagrams and Replacement parts for WHIRLPOOL ED25DQXAW00 | AppliancePartsPros.com

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ice maker flapper door does not close	robert buser	Refrigerator & Freezer Repair	0	08-30-2009 05:39 PM
ice maker flapper door	james e Campbell	Refrigerator & Freezer Repair	6	06-19-2009 03:40 PM
whirlpool ice dispenser chute door wont close	tksnyder	Refrigerator & Freezer Repair	1	05-22-2009 10:59 AM
Ice Flapper Door	phoneimage	Refrigerator & Freezer Repair	1	11-12-2008 10:08 AM
Whirlpool 465 oven door won't close	merc1100sc	Oven Repair (including Ranges and Cooktops)	0	09-23-2008 08:34 AM

Whirlpool ice flapper door won't close

Refrigerator & Freezer Repair

I've read other posts and responses on removing the front panel by prying it off. I'm using a 1 1/2