Discuss

Need advice on replacing the plastic Pins

 in

Refrigerator & Freezer Repair

. "

Probably like others, the plastic pins on the inside which hold the produce drawers broke off. So I ordered and

..."
 
 
Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Appliance Repair Help > Refrigerator & Freezer Repair » Need advice on replacing the plastic Pins

Post New Thread  Reply By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use.
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 03-11-2008, 11:02 AM
greener greener is offline
Junior Member
 
Join Date: Mar 2008
Posts: 1
greener is on a distinguished road
Default Need advice on replacing the plastic Pins
Model Number: GLHS267ZA   Brand: Frigidaire   Age: 1 - 5 years   

Probably like others, the plastic pins on the inside which hold the produce drawers broke off. So I ordered and received the new pins. My question is in installation.

It seems to be that these should be epoxied and then some type of clamp should be extended across the inside so the epoxy drys firmly with the pins.

If this is the case, do I need to remove all food? is their a better adhesive, which is not so toxic than epoxy? am I doing this wrong?

thanks for any advice.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
VIEW DIAGRAMS AND PHOTOS, ORDER PARTS

powered by AppliancePartsPros.com
Reply



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Compact GE Front Load Plastic Shavings LeslieJ Washer Repair 0 02-04-2008 12:06 PM
Need Advice awillis Refrigerator & Freezer Repair 1 01-22-2008 10:43 PM
Kenmore washer has broken plastic piece jordan1957 Washer Repair 2 01-07-2008 11:29 AM
Melted plastic on my glass stove top marlamb@comcast.net Oven Repair (including Ranges and Cooktops) 1 12-28-2007 01:20 PM
need advice tub wont spin out ton123 Washer Repair 1 08-15-2007 05:01 PM


All times are GMT -7. The time now is 05:45 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.0.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15