|Register | FAQ's | New Posts | Today's Posts | Extras|
Stopped running, replacing things aren't fixing
Model Number: ED22PQXFN00 Brand: Whirlpool Age: More than 10 years
Have a Whirlpool 'fridge that have the following replaced already:
1. Cold Control
2. Defrost Timer
3. Defrost Thermostat
Fridge won't stay running. When it does run it will get cold like it should for a while but then will stop working after 4-5 days. I have spun the defrost thermostat and had it 'click' a couple of times but didn't kick on. Have turned off the unit at the Cold Control but didn't kick on. Have unplugged then plugged (which it would start running a short time after) in but didn't kick on.
With parts replaced mentioned, freezer fan inside is not spinning as well as the fan at the back bottom near the compressor with power on.
The fan at the back bottom near the compressor spins freely when moved as well as the freezer fan.
I can make ice. I can get water when the unit first starts running but then i can't once it reaches temperature.
all this maybe overkill but i am trying to list all the things that i have been running across...
I was attempting the repair but keep falling up short. Was thinking to ask for some help... so what do you say Luigi? Can ya help out your old pal Mario?
thanks in advance (tia)
Whirlpool Refrigerator ED22PQXFN00, MFG 02-99
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Whirlpool stopped no fan running||nomang||Refrigerator & Freezer Repair||3||05-02-2012 11:32 AM|
|Dryer Stopped running||Hawki39||Dryer Repair||2||11-13-2010 05:04 AM|
|Whirlpool DW Stopped running||WHGJR||Dishwasher Repair||0||08-02-2010 05:07 AM|
|maytag stopped running and won't start back after replacing timer||draroberts||Dryer Repair||1||06-15-2010 08:33 AM|
|just stopped running||johnthehandyman||Dryer Repair||3||09-16-2008 05:26 PM|