Model Number: GI7FVCXWA00 Brand:
5 - 10 years
Hi everyone. Hi, I have a whirlpool gold GI7FVCXWA00 and the sealed system let loose. The compressor is a variable speed type. I brazed it in, cleaned it out and vacuumed.No leaks are detected and holds good. I have the tech sheet but I am not sure about the r134a psig. I do not have a scale to weigh the r134a. I charged the system and used 3.5 psig on low side and the highside was reading 150. I have the temperature set to 00 and my thermometer is reading 6 degrees. The temperature relationship test chart is confusing to me from the tech sheet.It states: Evaporator outlet 70 to 90 degrees -4 -6 Evaporator inlet 70 90 degrees -4 -6 Suction line 70 90 degrees 75 97 Average total wattage 70 90 degee 70-85 75-100 suction pressure +2psig 70 90 degrees 6.0 3.6 head pressure +5 psig 70 90 degrees 70 125. What should the low/high pressure psig be according to these specs? The frost pattern is good but the frig is set to 38 and temp if 32. Both thermistors are within spec and damper opens/closes. I also replaced the main board. Can someone decipher the tech sheet information and explain what the psig for low/high should be according to tech sheet?