GE22.1 cu.ft. Side by Side tipped to vacuum and clean Now no cold
Model Number: GSH22JFRE Brand:
5 - 10 years
L I have a 22.1 GES Side by Side that's has been working perfectly ,we tipped it back to allow access to vacuum out the condenser coils, it was tipped with the bottom front edge 10 high for 10 minutes (I was closer to 5 minutes ) and pushed back into the space . I waited 8 hours to plug it back in. Evaporator Fan Spinning ,coils all dry and clean. The compressor starts right up condenser fan spinning as well. The compressor is quiet and smooth with the line going out cold but should be colder I think to the touch. There is a clicking from the double size relay in the center of the board. I do Auto ac so the evac and charge aren't a problem but as the compressor starts up instantly and runs smoothly ,it wouldn't seem likely that is the issue. I have any tool as well as a/c R134 rig and bought the adapter r12 to my gauges. The new charge port goes lower left from this label (pic attached)and currently pinched off at the factory. Please advise.I have also purchases a condenser fan cooling motor that I don't want to keep for 70.00 if not needed. how can I tell if I need recharge or condenser or avaporator issue,booth running fine as is the compressor . Thank You , Adam Campbell. LAS VEGAS,NV.