Rank: Member
Groups: Registered
Joined: 6/29/2014(UTC)
Posts: 4
|
Current Status:
LED light double blinks when door is open. Solid when LED door is closed and beam is unlocked.
:)
No frozen water in line. Check by fishing a flexible wire about a foot into the tube from the tray fill.:)
Water dispenses fine from the door and ice bin dispenser works..:)
Based on this and reading other posts I ordered and installed a new ice-maker. Installed the ice-maker and nothing.:confused:
I then did the jumper between the N and V test points. Nothing.:(
Jumpered between H and T. Nothing.:mad:
Now what?:confused:
bump
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/29/2014(UTC)
Posts: 4
|
Originally Posted by: RicHammond  Current Status:
LED light double blinks when door is open. Solid when LED door is closed and beam is unlocked.
:)
No frozen water in line. Check by fishing a flexible wire about a foot into the tube from the tray fill.:)
Water dispenses fine from the door and ice bin dispenser works..:)
Based on this and reading other posts I ordered and installed a new ice-maker. Installed the ice-maker and nothing.:confused:
I then did the jumper between the N and V test points. Nothing.:(
Jumpered between H and T. Nothing.:mad:
Now what?:confused:
An inquiring mind wants to know
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/29/2014(UTC)
Posts: 4
|
bump thread to top
Still looking for help before wife shoots me. :eek:
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
If no voltage between pins L and N on the modular icemaker, remove the receiver pc board and put a wire jumper between the black and black/ white wires. If you now get voltage to the icemaker, you have bad optics boards. Order them on this site.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/29/2014(UTC)
Posts: 4
|
Originally Posted by: richappy If no voltage between pins L and N on the modular icemaker, remove the receiver pc board and put a wire jumper between the black and black/ white wires. If you now get voltage to the icemaker, you have bad optics boards. Order them on this site. is this the same as the Ice Level Power Control Board? Whirlpool 4389102 Ice Level Power Control Board Kit - AppliancePartsPros.comif so is this on the right or left?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
Yes, the large, upper board is the receiver board, on the right side of the freezer. Just remove the receiver board and stick the jumper in the connector.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
