Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
GE Profile Ice Maker
Options
Go to last post Go to first unread
Model: PSS25MGMB Brand: GE Age: More than 10 years
Previous Topic Next Topic
Sad Ice Man  
#1 Posted : Sunday, August 4, 2013 8:10:44 AM(UTC)
Quote
Sad Ice Man

Rank: Member

Groups: Registered
Joined: 8/4/2013(UTC)
Posts: 2
Ice maker not getting water. I replaced the water valve, still nothing. I was getting a squirt of water into the ice maker cube mold, but now that signal has stopped being sent to the valve. Could that be the ice maker itself or could there be a main control board issue?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
applianceman  
#2 Posted : Tuesday, August 6, 2013 7:44:54 AM(UTC)
Quote
applianceman

Rank: Member

Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648
Do you have good water pressure to the water dispenser? If not the water filter would be the first thing I would look at. Just go ahead and replace if it is over 6 months old or you can try the bypass plug (came with refrigerator to bypass the filter).

If you don’t have water pressure at the water dispenser and you rule out the filter look at the water pressure coming to the refrigerator from your pluming.

If water pressure is good at the dispenser check to see if the tube that feeds water to the icemaker (inside the freezer) is filled with ice. If this is the case remove the ice and you should be ok since you already changed the water valve.

If you find none of these to be your issue replace the icemaker itself.

GE Refrigerator Repair Guide
Back to top
Sad Ice Man  
#3 Posted : Tuesday, August 6, 2013 7:55:17 AM(UTC)
Quote
Sad Ice Man

Rank: Member

Groups: Registered
Joined: 8/4/2013(UTC)
Posts: 2
Thanks. I've already ruled out the pressure, filter and ice blockage issues. So even though the ice maker rotates to flip out any cubes, it still sounds like the unit itself is my problem after all.
Back to top
applianceman  
#4 Posted : Tuesday, August 6, 2013 8:24:17 AM(UTC)
Quote
applianceman

Rank: Member

Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648
Does your icemaker have a switch and a light or just a mechanical slide to turn it on and off.

If it has the switch and light it is electronic. If this is the case turn it off and wait 30 seconds. Then turn it back on and push in on the paddle three times. See if it runs water at the end of the cycle then.

If not I would say the icemaker is bad.
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
GE Profile ice maker intermittently worked, now completely dead (Refrigerator & Freezer Repair)
by wolfpack95 8/29/2022 7:27:03 AM(UTC)
GE Profile Ice Maker Not Working (Refrigerator & Freezer Repair)
by Sparky7 8/28/2016 4:58:26 PM(UTC)
GE Profile Ice Maker Drips (Refrigerator & Freezer Repair)
by cliff78641 2/16/2012 10:07:29 AM(UTC)
Ge profile ice maker (Refrigerator & Freezer Repair)
by Jchristl 12/2/2011 11:42:09 AM(UTC)
GE Profile Ice Maker working, but not dispensing ice (Refrigerator & Freezer Repair)
by lvjennings 8/14/2009 4:45:25 PM(UTC)
GE Profile Ice Maker Leaking (Refrigerator & Freezer Repair)
by ptraynha 6/9/2009 11:18:19 AM(UTC)
GE Profile Ice Maker Not Working (Refrigerator & Freezer Repair)
by petergrif42 10/19/2008 5:43:46 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET