Rank: Member
Groups: Registered
Joined: 3/13/2013(UTC)
Posts: 1
|
my refrigerator started having the alarm go off last week then error on screen and after unplugging and plunging it back in it would reset for a couple hours and the alarm and error again. it did this for 2 days and then would not reset and there was a clicking noise ( relay clicking on and off and the fan and compressor start on and off each time the click happens)from the main board under the frig.
ordered a user interface kit elextrolux p/n # 5303918584
and a compressor run capacitor electrolux p/n # 5304464438 , replaced parts ( used the patch wire kit as directed on main board ) and now the fig turns on about 2-3 second after it is plunged in then display lights up, then about 8 seconds later the
ERROR SY CF on the screen, fig will not run.
Please help :) i need my fig running
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
This error code means "Communication failure after power up". Check the wiring and connections between the user interface board (dispenser) and the main control board. If there is nothing wrong then one of the two parts in the kit you purchased is defective.
Gene.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
