|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » no water to ice maker |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
10-22-2012, 07:20 PM
|
|||
|
|||
no water to ice maker
Model Number: ksrx25fnbt01 Brand: Kitchen Aid Age: 5 - 10 years
no water-ice maker quit producing-i removed icemaker-put hair dyer to rubber line for 5 min-disconnected line at water inlet valve-blew air thru-line is clear. 55 volts at black wire supplying ice maker next day 120 volts at same wire-now is 55 volts. with ice maker still disconnected red optics blinks-when i depress switch-red light is steady on
What is correct troubleshooting from here. Thank you.  Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
10-22-2012, 10:55 PM
|
||||
|
||||
|
Perform the troubleshooting as described in the attached file and post the results.
Here are the breakdown diagrams and Parts for Whirlpool KSRX25FNBT01 Refrigerator - AppliancePartsPros.com Gene.
__________________
Appliance Repair Expert in Orange County, California. Order Appliance Parts with 365-Day Hassle Free Return Policy - AppliancePartsPros.com
|
|
10-23-2012, 04:37 PM
|
|||
|
|||
|
Quote:
checked ice maker to center harness and connection is good continued with test and got 3 pulses
|
|
10-23-2012, 04:47 PM
|
||||
|
||||
|
Quote:
Gene.
__________________
Appliance Repair Expert in Orange County, California. Order Appliance Parts with 365-Day Hassle Free Return Policy - AppliancePartsPros.com
|
|
10-23-2012, 05:16 PM
|
||||
|
||||
|
I would recommend to replace the ice maker. Before you'll install the new ice maker, using a flat screwdriver make sure that the slot for the bail arm switch is in On (down) position. Keep in mind that the new ice maker has to be cool down (takes about 12 hours) before producing ice.
- The ice maker Part number: 2198597 Gene.
__________________
Appliance Repair Expert in Orange County, California. Order Appliance Parts with 365-Day Hassle Free Return Policy - AppliancePartsPros.com
|
|
10-24-2012, 07:41 PM
|
|||
|
|||
|
still 56 volts to ice maker-i jumped pins 3-4 on right side board and with jumper in icemaker it started moving to harvest
Does this mean my board is bad because i am not getting 110 volts to the icemaker harness? thanks
|
|
10-24-2012, 08:07 PM
|
||||
|
||||
|
Yes, it does. Very likely the problem is with that board even the result of the test is different.
If you did order the ice maker from APP then you definitely can return it. - The PC boards kit Part number: 4389102 Gene.
__________________
Appliance Repair Expert in Orange County, California. Order Appliance Parts with 365-Day Hassle Free Return Policy - AppliancePartsPros.com
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Can You adjust water flow for Maytag ice maker #95109-1. ( Older ice maker) | 11charm34 | Refrigerator & Freezer Repair | 0 | 09-02-2012 11:49 AM |
| Kenmore Ice Maker --no ice--maker or water control valve | cps.extra | Refrigerator & Freezer Repair | 0 | 08-13-2011 08:59 AM |
| New ice maker installed but no water running to ice maker | corona32guiness | Refrigerator & Freezer Repair | 0 | 01-06-2010 05:14 PM |
| Ice Maker water is dispensing into the bin instead of into the cube maker | jghani | Refrigerator & Freezer Repair | 0 | 09-12-2009 10:27 AM |
| Ice Maker water is dispensing into the bin instead of into the cube maker | jghani | Refrigerator & Freezer Repair | 0 | 09-12-2009 10:20 AM |
Linear Mode
