Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
appliancerepair09  
#1 Posted : Thursday, September 24, 2009 9:15:30 AM(UTC)
Quote
appliancerepair09

Rank: Member

Groups: Registered
Joined: 9/24/2009(UTC)
Posts: 2

i am working on a maytag front loader that will let water go into system, but when it's time to tumble tub tries to work, but whole system will just cut off. any ideals where to start?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
cenate  
#2 Posted : Friday, September 25, 2009 9:30:51 AM(UTC)
Quote
cenate

Rank: Member

Groups: Registered
Joined: 9/25/2009(UTC)
Posts: 2

does door lock light come on? unit will not spin if not locked.If not lite unplug unit open top control three screws on to and roll control forward. look on main board somewhere in middle of control there is a small blue block about 1/4"x1" right above that is there a resistor blown?
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.