[Matt Scheuermann]

Used to work @ appliance & HVAC plumbing place. Aquired this because test port at crimp was not brazed from factory. I did not work in appliance area. All the fans run, condenser is clean. Freezer temp 23 set @ 7. Fridg temp 32 set @ 4. As soon as compressor starts evaporator line starts freezing. Suction psi when running is 23, 28 F on 134 scale. Equalized not running 30psi 35 F. Appliance dept did initial fix & charge.

[slugranch]

Originally Posted by Matt Scheuermann

Used to work @ appliance & HVAC plumbing place. Aquired this because test port at crimp was not brazed from factory. I did not work in appliance area. All the fans run, condenser is clean. Freezer temp 23 set @ 7. Fridg temp 32 set @ 4. As soon as compressor starts evaporator line starts freezing. Suction psi when running is 23, 28 F on 134 scale. Equalized not running 30psi 35 F. Appliance dept did initial fix & charge.

Very common to find service stubs not brazed. Mfr. just crimping, and say they don't leak. I'm old school, I braze them after repairs.