Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

2 Pages12>
New Topic Post Reply
Options
Go to last post Go to first unread
bjparsons  
#1 Posted : Tuesday, June 12, 2012 8:16:51 PM(UTC)
Quote
bjparsons

Rank: Member

Groups: Registered
Joined: 6/12/2012(UTC)
Posts: 8

Slow flow from water dispenser and occasional hollow ice cubes. Replaced water valve and still same problem. Replaced water filter and momentarliy got a good strong stream, but within a few seconds went back to same problem. Have filled several tall glasses of water, well beyond 2 minutes to get rid of any trapped air. Flow is a little better but not what it used to be before this whole problem started. Out of ideas. Please help.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, June 13, 2012 5:44:39 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Did you check the incoming water pressure? Where it's coming from?

Gene.
bjparsons  
#3 Posted : Wednesday, June 13, 2012 6:23:26 PM(UTC)
Quote
bjparsons

Rank: Member

Groups: Registered
Joined: 6/12/2012(UTC)
Posts: 8

Originally Posted by: Gene Go to Quoted Post
Did you check the incoming water pressure? Where it's coming from?

Gene.


Full water pressure from the valve on the wall going into the fridge.
Gene  
#4 Posted : Thursday, June 14, 2012 10:29:25 AM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Very likely the problem is a bad water filter head (#17 at the diagram).

- The water filter head Part number: 67004106
Part number: 67004106



Gene.
Dyp  
#5 Posted : Thursday, August 30, 2012 5:02:16 PM(UTC)
Quote
Dyp

Rank: Member

Groups: Registered
Joined: 8/14/2012(UTC)
Posts: 4

Originally Posted by: bjparsons Go to Quoted Post
Full water pressure from the valve on the wall going into the fridge.

Were you able to get this resolved yet? I am having the same issue.
bjparsons  
#6 Posted : Tuesday, September 4, 2012 7:45:58 AM(UTC)
Quote
bjparsons

Rank: Member

Groups: Registered
Joined: 6/12/2012(UTC)
Posts: 8

Not yet. Will have to empty the fridge in order to change the filter head and have too much food in there right now. This looks to be the culprit so at the earliest chance I'm going to order this part and switch it out.
bjparsons  
#7 Posted : Monday, October 8, 2012 9:03:38 AM(UTC)
Quote
bjparsons

Rank: Member

Groups: Registered
Joined: 6/12/2012(UTC)
Posts: 8

Please click one of the Quick Reply icons in the posts above to activate Quick Reply.
bjparsons  
#8 Posted : Monday, October 8, 2012 9:25:54 AM(UTC)
Quote
bjparsons

Rank: Member

Groups: Registered
Joined: 6/12/2012(UTC)
Posts: 8

Trying to feed the old tubes, and eventually the new ones, through the back of the fridge but there is a metal fitting, a compression fitting I believe, on one of the tubes that will not fit through the hole in the foam insulation in the back of the fridge. How do I feed the tubes through with this fitting? Thanks.
Gene  
#9 Posted : Monday, October 8, 2012 1:32:02 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: bjparsons Go to Quoted Post
Trying to feed the old tubes, and eventually the new ones, through the back of the fridge but there is a metal fitting, a compression fitting I believe, on one of the tubes that will not fit through the hole in the foam insulation in the back of the fridge. How do I feed the tubes through with this fitting? Thanks.


The sealed system metal tubes are coming into the freezer while the water filter head tubing is coming into the refrigerator very different way at the top of the unit. Click on the part number and scroll down to the Q&A section for more information.

Gene.
bjparsons  
#10 Posted : Monday, October 8, 2012 1:35:36 PM(UTC)
Quote
bjparsons

Rank: Member

Groups: Registered
Joined: 6/12/2012(UTC)
Posts: 8

Thanks Gene for all of your help. Replacing the water filter head fixed the problem. The only snag was that I didn't realize there was a little foam piece that pops out in order to feed the lines through the opening near the filter head. Once I figured that out it took less than 15 min to change it out. Thanks again.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
GE fridge water dispenser slows to trickle, speeds up when filter is twisted (Refrigerator & Freezer Repair)
by Guest 1/11/2024 5:03:35 AM(UTC)
kenmore water dispenser slow (Refrigerator & Freezer Repair)
by scmb 3/3/2013 6:42:32 PM(UTC)
Water Dispenser Slow to Shut Off (Refrigerator & Freezer Repair)
by chip11 2/18/2012 1:13:37 PM(UTC)
GE Profile Water Dispenser Slow (Refrigerator & Freezer Repair)
by Jesse_Edw 8/26/2011 4:08:39 AM(UTC)
Amana Water Dispenser slow (Refrigerator & Freezer Repair)
by qglasspa 2/28/2011 2:57:14 PM(UTC)
Water Dispenser Slow (Refrigerator & Freezer Repair)
by Ed60062 3/6/2010 12:26:26 PM(UTC)
2 Pages12>
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.