|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Frezzer is Fine Refrig is Warm - Fan is running |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: TBX21NIXFRWW Brand: GE Age: More than 10 years
Have checked and it is not froze up and the fan is running....Could it still be a fan problem due to running too slow?
Ads By Google Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
|||
|
Cold air enters the fridge through a damper or vent between the freezer and fridge. The evaporator fan in or behind the freezer blows the air through. There is an adjustment to open and close this vent to allow more or less cold air in. Your fridge temp control opens and closes it. Make sure it's open.
Part 304 on diagram 2 is your damper. |
|
|||
|
Certainly there is a speed where the fan wouldn't be blowing enough air into the fridge. You should be able to feel the air blowing through the damper in the fridge. There is also a return vent near the bottom which should be open to allow circulation back to the freezer.
|
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Freezer is fine / Refrig side is warm | rakesh | Refrigerator & Freezer Repair | 0 | 08-29-2009 05:01 AM |
| Freezer fine refrig warm | tsalagi | Refrigerator & Freezer Repair | 0 | 08-28-2009 09:40 AM |
| Frezzer warm, refridgerator OK | rmrnewjersey | Refrigerator & Freezer Repair | 1 | 06-17-2009 11:10 AM |
| frezzer fine, ref. just stop working out of blue | mariagonzalez | Refrigerator & Freezer Repair | 1 | 05-14-2009 05:40 PM |
| Frezzer And Refrigerator Warm | JIM RUIZ | Refrigerator & Freezer Repair | 1 | 12-24-2008 02:21 AM |