Rank: Member
Groups: Registered
Joined: 11/4/2011(UTC)
Posts: 1
|
Have been seeing grit in bottom of drinking glasses when using my kenmore refrigerator. Pulled fairly new filter out to replace and water would not stop running out of where filter was plugged into. I could go get new filter and replace but how do i know if problem is filter or something else. they are not cheap.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: kennychauncey  Have been seeing grit in bottom of drinking glasses when using my kenmore refrigerator. Pulled fairly new filter out to replace and water would not stop running out of where filter was plugged into. I could go get new filter and replace but how do i know if problem is filter or something else. they are not cheap. Kenny, If water continued to fill the filter housing when you removed the filter, the bypass mechanism in the filter housing is the issue, you need to consider a new filter housing, Part number: AP4369390
Did you have some plumbing work done recently, that could be an issue with the "grit" otherwise you'll need to remove and check the water reservoir in the fridge for a build up in the tank or replace the tank, Part number: AP3181346
Thanks and Good Luck, :) :) :)
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
