Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
rockmacc  
#1 Posted : Saturday, May 16, 2009 2:28:34 AM(UTC)
Quote
rockmacc

Rank: Member

Groups: Registered
Joined: 5/12/2009(UTC)
Posts: 2

Ge motherboard part # mix up?
Ge pds22mfsaww bottom freezer
Order Date: 05/12/09
Order Number: 673294

part #AP4297272 (WR55X10656) Main control board assembly domesti

this one looks exactly like mine on your site
Board #200d4854g014 this is the one I ordered # diff 4


The one shipped #computime 200d4850g014 # diff 0

The part # is the same but they have different # on the board and are very different

I will attach the pictures if I can thanks rock

Rocker switch S136.doc (28kb) downloaded 18 time(s).

rockmacc attached the following image(s):
the one I ordered.jpg
the one shipped.jpg
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
george747  
#2 Posted : Tuesday, June 15, 2010 1:21:42 PM(UTC)
Quote
george747

Rank: Member

Groups: Registered
Joined: 6/8/2010(UTC)
Posts: 3

My situation is just the opposite. The board I removed from my refer is like the lower photo and it has 5 plugs on the right side. The board I was sent is similar to the upper photo with only 4 plugs on the right. The box was labeled W55x10942 but the board doesn't look like any of the photos of similar boards on the web. There is no J-5 and a lot of components are not there, just a bunch of jumers. Also, the board I received has one less relay. A schematic I have says J-5 is for the Quick Chill (somethng-can't read it). My refer is a PSI23SGNA. Was my box mismarked or wrong bord inside? Numbers on the board are: EBX1110P003; 94V-OOPCVO; 702130401.01GA and SWS 1048 (rev 1).
A sticker on the board has the following codes: WKKT 1304-00-00; 200D6221G009 and R102FC 3706DG. Anyone got a clue?
fhwood  
#3 Posted : Saturday, July 2, 2011 9:22:42 PM(UTC)
Quote
fhwood

Rank: Member

Groups: Registered
Joined: 7/2/2011(UTC)
Posts: 1

My old motherboard (MB) number is WKKT 1304-00-00 & the one I received is WR55X10942. Is the new MB the correct replacement for the old one?

Whenever I check to see if another MB should be used, the new one is the one that shows up.

If so, how do I connect to the new MB since it has more connectors than the old one?

Flynn
richappy  
#4 Posted : Sunday, July 3, 2011 2:49:27 AM(UTC)
Quote
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
All parts sites deliver the WR55X10942, a redesigned board that's probably more reliable.
It is pretty hard to miss-wire the new board, just plug in all the connectors into the new board where they where on the old board and ignore the other sockets on the new board.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.