Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
kdsavoy  
#1 Posted : Saturday, July 2, 2011 8:17:38 AM(UTC)
Quote
kdsavoy

Rank: Member

Groups: Registered
Joined: 12/5/2009(UTC)
Posts: 4

Several times now, we discovered that the refrigerator turns itself off for apparantly no reason. The controll panel at the top of the refrigerator is completely blank and the lights are still working. Refrigerator turns on when changing the temperature and stays on for several days.

I replaced the control unit/card about two years ago when the fan in the freezer section stopped working properly. Ice was melting even though the freezer was still working. A Sears repairman told me the control unit needed to be replaced because the fan in the freezer was not cycling properly.

Could the control unit need to be replaced again?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Sunday, July 3, 2011 3:13:39 AM(UTC)
Quote
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
I would remove the motherboard in the back AP3957581 and check for poor solder joints in the back of it, GE has had problems with these poor wave soldered boards.
kdsavoy  
#3 Posted : Sunday, July 3, 2011 5:55:29 AM(UTC)
Quote
kdsavoy

Rank: Member

Groups: Registered
Joined: 12/5/2009(UTC)
Posts: 4

Thanks, I'll do that soon.

If I do not find a problem, what would be the next step?
richappy  
#4 Posted : Sunday, July 3, 2011 7:33:38 AM(UTC)
Quote
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
In general, the control board just sends encoded signals to the motherboard to control the refrigerator functions. All the drivers are on the motherboard, so any total failure like this would be the motherboard.
You can confirm this by checking voltages when you have a failure. Line voltage to the motherboard, but nothing out would confirm a bad motherboard.
A GE tech once said, "You could have a bad encoder(control) board but still have the fridg functions working....)
This statement has tended to be correct in practice and seems logical.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.