Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
bgreen  
#1 Posted : Thursday, March 5, 2009 5:38:22 AM(UTC)
Quote
bgreen

Rank: Member

Groups: Registered
Joined: 3/5/2009(UTC)
Posts: 1

This is a challenge now. The icemaker stopped filling. We have checked the line and every single part of the icemaker for continuity: supply valve, shutoff switch, ejector motor (although this is not the problem), holding switch, and inlet switch. We replaced the inlet valve because the supply side to the icemaker (rather than the dispenser, since it works fine) didn't register as it should, and it made sense, since all of the other parts were OK.

It still doesn't work :eek: !!! My question is: If every part of the icemaker LOOKS good, and appears to be sound electrically, why isn't it working? What could be the culprit? The only part not tested was the ice mold heater and just as soon as we get some ice, we will need that :cool: .

I don't want to give up, after so much effort. Any help out there :D ?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.