Three Months ago installed the refrigerator. Upon installation, the ice make would make one tray, eject, and refill and freeze and not eject the subsequent tray. Removal of the ice maker and thoroughly drying the inside of the covered control module corrected the problem and ice maker was fine until last week.

Now I get no water coming into the tray but I still have chilled water throught the door. I checked the fill tube with a piece of flexible wire and was clear for the first 8-10 inches. Though obstructed to the wire, I found no sign of frozen water in the line.

Now with the flapper door open I get 2 rapid light pulses. When I depress the flapper door I was getting a solid light until today and now have the two rapid pulses when the flapper is depressed. Still no ice.

I have unplugged the refrigerator and let it sit for a few minutes to reset the electronics but to no avail.

Please help steer me in the right direction.

Thanks

RQ