Rank: Member
Groups: Registered
Joined: 7/30/2007(UTC) Posts: 2
|
This is a side by side. The refer side is not cooling properly. Temp in freezer will hold at ZERO and refer drops to 40 and will not cool any lower with Refer control wide open and freezer control down as low as it goes. Fan unit appears to be blowing lots of air. The baffle between freezer and refer is operating properly. Doors are sealed and no leaks. Compressor will run until refer reaches 40 degrees and then will shut off and it seems to restart okay and keeps refer at 40. I have checked the Starter Capacitor and it is okay. there is a temperature control device in the in the control housing in the top of the refer side that it's sensor sticks into the freezer and on the diagram it is labeled "Temperature control". Is this maybe the culprit to be replaced or is their something else I should be looking at??
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close