Rank: Member
Groups: Registered
Joined: 1/14/2009(UTC) Posts: 1
|
Decided to troubleshoot my icemaker since it has not been working for a while. First, I pulled the control panel and noticed the main IC's identification tag was melted into the top of the IC. I replaced the control board since I figured it was fried. No help. I took the icemaker itself apart but did not notice any abnormalities. The next test was for the solenoid. With the system on, I connected my DMM to check the icemaker's power plug to the solenoid. Nothing other than some residual voltage. In other words, no power was being sent to the solenoid. I wish I had a schematic to see what exactly calls for power to the solenoid. Regardless, I do not want to just continue replacing parts! Any ideas? The water dispenser works by the way. Thank you very much!
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close