Rank: Member
Groups: Registered
Joined: 1/6/2009(UTC)
Posts: 1
|
My unit will quit cooling on occasion. It will restart if I reset the thermostat or turn it off and back on then it operate normally for days and then shut down. I have replace the start relay and overload protector and still have the problem. What next? .
RLM
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638
Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
|
Here is your parts breakdown Model ET8MTKXKQ00Here is a tech sheet https://www.servicematters.com/d...0Sheet%20-%202213196.pdfFirst I would check in the control area/console. Could be a loose or correcec connection. Then my guess would be the thermostat. Next time give it a couple of taps if the unit starts up. I would replace the thermostat. You could place your meter across the thermostat contacts if you have 115 volts when the unit is supposed to be cooling then the contacts are not closing and it needs replacing. Only other contacts in the compressors circuit path are on the defrost board but just turning the thermostat on/off should not affect these. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
