Rank: Member
Groups: Registered
Joined: 2/24/2011(UTC) Posts: 3
|
This is a bottom freezer refrigerator. After working fine for about 7 years, it suddenly failed -- no cooling, digital temperature display blank, temp controls inoperative. I replaced the main control board (WR55X10942) and the display and controls came back to life and the compressor and evaporator fan began running. The freezer compartment cooled down to 0 degrees, but the top compartment hardly cooled at all (67 to 65 degrees according to the display) after more than 24 hours. Now, a few hours later, the freezer is up to about 9 degrees and the top is still about the same. I can't feel much air circulation in the top compartment. Before the sudden failure both compartments were holding at about the set points (0 and 37).
What should I do next?
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/19/2011(UTC) Posts: 5
|
Find the door flap that connects the freezer to the refrigerator. Make sure it is opening properly.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close